Anaheim Groves Improvement District- About Us
Logo-Home   Home   FAQs   Blog   Forum   About_Us   Contact_Us   


   

Parts & Accessories

Includes Main Street Vehicles

 
 

Most viewed
IMG_4244_6_1.JPG
120 views
mguest_1000.JPG
100 views
img_cin_135.JPG
98 viewsHere's the "cigar store Indian" at the curb in front of the, er, "20th Century Music Company." Huh? It occured to me that Park guests under 30 years of age probably have no idea why this Indian sculpture is here on Main Street. The music store was originally a tobacco shop until 1990. After the change of merchandise type, the Indian has defiantly remained standing proud with his gaze directed towards distant Frontierland. Probably just a coincidence, I suppose.
IMG_6056_1.JPG
97 views
img_cin_133_1.JPG
91 views
img_cin_131.JPG
84 views
IMG_4823_1_1.JPG
78 viewsHere are the harmonious fellas with just a bit of touch-up left to do. To see them on the Olszewski Street Car look at the "Modified Horse Drawn Streetcar" file.
IMG_6054_1.JPG
78 views
img_cin_133.JPG
77 views
olsfab.JPG
76 viewsEach summer more than a score of popular Disney characters make daily appearances in the Park. One such character is Pluto, well known companion of Mickey Mouse. Pluto is able to sign autographs and draw cartoons himself, holding a pencil between his paws. Incidentally, Pluto's name in real life: Tony Barksdale. (Vacationland, summer 1963)
IMG_4842_1_1.JPG
A Magic Shop Trick Being Played on an Unsuspecting Guest70 views
IMG_5656_19_1.JPG
70 views
IMG_4637_1_1.JPG
60 viewsWe are gutting all of the lighting from the buildings that do not have special lighting affects. We will opt for something more simplistic like using a string of christmas lights or creating a lighting scheme involving a chain of small incandescent bulbs (2-3 bulbs per building). We decided to stay with incandescents because they have a warm look and feel to them.
IMG_4821_1_1.JPG
59 viewsAfter experiencing a Horse Drawn Streetcar ride down Main Street with the Dapper Dans, Tahnee suggested I model a set of them for one of our Olszewski streetcars. Sure, no problem. I selected four suitable figures from our Preiser and Woodland Scenics stock and reposed them a bit for the Streetcar. I then had to "dress" them in the proper attire (they do have to be dapper, you know) by carving them a little with a hobby knife and adding a little putty. Of course, each had to be in possession of a straw hat too.
4834.jpg
56 views
IMG_5576_7_1.JPG
56 viewsWe are installing a working motorized Omnibus on our platform. To do this, we have purchased a Faller Car System N-scale starter set that comes with a Mercedes truck. To build our Omnibus, I first had to remove the Mercedes truck body-work from the chassis. I decided it would be fun to model the original Disneyland Omnibus from 1956 (see "Disneyland's Omnibus" file). I removed about 1/16" from the wheelbase to shorten it up a bit. The chassis was then epoxied back together. The large green object here is the battery
4833.jpg
55 viewsI've added six passengers and the Dapper Dans to one of our Street-Cars. Initially, I had the 'red' Dapper Dan posed inside the car. I later decided (okay, Tahnee suggested) he'd be more visable out on the running board, so, he has been relocated.
IMG_2936_3_1.JPG
55 viewsThe red Horseless Carriage was the first motorized vehicle to begin chugging up and down Main Street. Patterned after a real 1903 Oldsmobile the car began carrying guests on May 12, 1956.
mcd_1000.JPG
55 views
scan0.jpg
55 viewsFor Disneyland's 50th Anniversary Celebration, attractions that were present on opening day had vehicles painted in gold-tone liveries. One of the Horseless Carriages got the treatment, shown here resplendent in champagne gold paint and even a gold canopy! Cast member Steve has been chauffeuring Main Street vehicles for many years.
omni_1000.JPG
54 views
IMG_5614_1_1.JPG
53 viewsAdditional painting has been completed and a driver takes his place. The graphics were made from reducing a post card on a copy machine to the correct size and then cutting them out. This was also done to add the guests in the windows to the lower level. This is a simple but effective 'trick.' The wheels were painted a light ivory and Italian red.
IMG_4811_2_1.JPG
51 views
IMG_5623_6_1.JPG
50 viewsWith the addition of a cast member conductor we're loaded and ready to roll on up to the Central Plaza. All I need to do now is install 'guests' on the right side lower deck, add the destination sign on the front of the upper deck, and stripe the canopy (yikes!).
IMG_4835_1_1.JPG
49 viewsTahnee was right. The red Dapper Dan looks better on the running board. We have a photo of the real Dapper Dans 'hangin' out' on a Street Car in the "Disneyland's Horse Drawn Street-Car" file.
IMG_3463_2_1.JPG
Horseless Carriage Painted Red48 views
IMG_5467_12_1.JPG
47 viewsI began the project of building the Corn Dog Truck by purchasing two N-Scale metal truck kits from GHQ: (1) 56-010, 1941 Chevy Stake Body; (1) 57-006, Model A Pick-Up. Parts from the two kits were combined to construct the basic chassis. Only the hood and running boards/fenders were used from the Model A kit, while the chassis, wheels and flat-bed were used from the 1941 Chevy. The 1941 Chevy chassis and bed was shortened and the Model A's running boards received the same treatment. The two were then super-glued together. The model A's hood was then glued on while the 1941 Chevy's wheels were then applied.
IMG_5617_4_1.JPG
47 viewsHere's a shot of the steering wheel I fabricated from .010" brass wire (for the rim) and .010" ABS for the spokes. This is the second wheel I had to make as I lost the first one into our carpet! Oh well.
IMG_5585_5_1.JPG
46 viewsIf you look closely, the man at the service window of the truck (left of view) is holding a little girl who is passing the money to the cast member inside the vehicle. The girl second in line is on her celular phone, no doubt informing the party on the other end of the menu selection. I still have another set of table and chairs to add under the third umbrella to the right but, hey, we're almost done here.
IMG_3834_3_1.JPG
45 viewsWe've opted to replace the lamps on Main Street with smaller Marklin Z scale lamps. The original supplied streetlamp is on the left and the Marklin unit to the right. And yes, they light up too!
IMG_3460_3_1.JPG
Yellow Olszewski Horseless Carriage next to the Modified Red Horseless Carriage42 views
IMG_5618_1_1.JPG
42 viewsThe steering wheel has now been installed along with the headlights. If you look closely in the cockpit views you can also spy the shift and hand-brake levers! The headlights are made from .080" styrene rod with rings of .010" X .018" brass bar. They were attached to the chassis with .012" brass wire "L" support brackets. Each headlight assembly contains four separate parts. Also, a brass radiator cap has been added from .012" brass wire.
IMG_0471.jpg
41 views
IMG_5616_3_1.JPG
41 views
IMG_5619_2_1.JPG
41 views"Yes, you can sit up front. Climb on up here." Note the brass grab rail made from .008" brass wire. The battery has now been 'blacked-out' with some flat black paint and, with the figures added, its intrusion into the cockpit area isn't really noticeable anymore.
IMG_4824_1_1.JPG
40 views
IMG_5468_13_1.JPG
37 viewsI then assembled the cab from .020" ABS sheet plastic.
IMG_5620_3_1.JPG
36 views
IMG_0042_1.JPG
35 viewsI began the model by first removing the right arm and replacing it with one from another N scale donor figure. I used paper for making the blanket and the Chief's feather headdress and buckskin tassels. Putty and paint was used to complete the model. The Chief is shown here in a temporary setting.
IMG_5655_18_1.JPG
35 views
IMG_4585_1_1.JPG
34 views
IMG_4803_1_1.JPG
34 views
IMG_5577_8_1.JPG
34 viewsThe lower rocker-panel area was made from Bass wood and shaped to form the nice curvature of the body-work. I then created the wheel-wells before attaching the panels to the chassis by sanding the area away with my Dremel tool. Fenders were fabricated from .010" ABS sheet.
IMG_5588_8_1.JPG
34 views
IMG_5591_1_1_1.JPG
34 viewsThe bench seats have been made from Evergreen brand scribed styrene N-scale passenger car siding and installed. The canopy roof supports are being installed. These are made from .010" X .018" brass bar. The staircase is made from styrene strips with .010" ABS plastic wraps. The white area along the roof of the first level is .010" styrene pieces to 'flush-out' this area with the brass canopy supports and also forms the top of the lower level's windows.
IMG_5604_1_1.JPG
33 viewsPainting underway. I mixed the color from Testors Hobby Enamels using French Blue, #1124 Gloss Green, and Gloss Black. The model was sprayed with an airbrush.
IMG_5624_7_1.JPG
33 views
IMG_5654_17_1.JPG
33 views
mod_townband.JPG
33 views
IMG_5594_4_1_1.JPG
32 views
IMG_5606_1_1.JPG
32 viewsThe front axle assembly has been re-installed, the hood, radiator, firewall and driver's seat fabricated from styrene. The front fenders were made from .010" ABS plastic and supported over the wheels by brass rod. Steps from ABS sheet attached to the chassis also support the fenders behind the wheels. A brass rod here locates the position of the future steering column.
IMG_5611_6_1.JPG
32 viewsThe removeable canopy was made from .010" styrene sheet.
IMG_3313_1_1.JPG
31 viewsThe yellow Horseless carriage was the second on Main Street and began service on December 9, 1956.
IMG_3474_2_1.JPG
"Before" Model of the Indian Chief31 viewsI used a Preiser N scale figurine from their #79138 "Police On Horseback, Germany" set. Two horse and riders are included in the set and I chose the horse more closley posed to the Disneyland Chief's mount.
IMG_5578_9_1.JPG
31 viewsHere the 'box' that conceals the electrics and forms the first level of the Omnibus has been placed on the chassis. This box was made from .020" ABS sheet plastic and is removeable. Note that a clearance hole had to be opened-up to clear the battery. This is okay as the battery will be hidden by the upper level's bench seats.
IMG_5608_3_1.JPG
31 views
IMG_5609_4_1.JPG
31 viewsN-scale 'guests' have taken their place aboard the upper deck. N-scale photo-etched stainless steel mesh has been installed to keep the kids from falling off.
IMG_5631_14_1.JPG
31 viewsHere's a view of our two working horses and the additional horse and cast member.
IMG_5635_19.JPG
31 views
IMG_5595_1_1.JPG
30 viewsHere the front axle assembly has been removed and the bench seats masked for painting.
IMG_5635_21.JPG
30 views
IMG_4591_2_1.JPG
29 views
IMG_5602_8_1.JPG
29 views
IMG_3485_1_1.JPG
28 views
IMG_5484_2_1.JPG
28 views
IMG_5607_2_1.JPG
28 viewsThe passenger seat is installed. Note that it has had to be trimmed to clear the battery.
IMG_5610_5_1.JPG
28 views
IMG_5612_7_1.JPG
28 viewsIt's starting to look like something at this point.
10_When_You_Wish_Upon_a_Star.mp3
When You Wish Upon a Star27 views
IMG_0780.jpg
27 views
IMG_5592_2_1_1.JPG
27 views
IMG_5603_9_1.JPG
27 views
IMG_5604_1_2.JPG
27 views
mod_townband_1.JPG
27 viewsThis patriotically-attired music ensemble was modeled using Preiser and Woodland Scenics figures. Five of the members are Preiser while one -the banjo player- is from WS. Donald Duck, of course, is from the Olszewski Fab Five pack. All band members had their lower portions removed from the waist down and replaced with those from other figures because the Preiser band figures come in Bavarian style costumes. Heads were all exchanged with those having suitable hats. I had to extend the neck of the banjo instrument because it was not formed during the factory molding process. All that was left to do was paint them. My photos taken of this group at Disneyland over different visits revealed that the red, white, and blue costumes can vary in color combinations and patterns amongst the members. This was a fun little project that will add some interest (and color) on our Main Street model. They will be installed in front of the Disney Showcase store on the east side of Town Square. Now, if only I could remember the name of this ensemble! Can anyone help out here?
IMG_3799_2_1.JPG
26 views
IMG_5478_3_1.JPG
26 viewsI made a "Outdoor Vending" department cast member to staff the truck from a Preiser figure. She was shortened and glued onto a base to make it easy to position her inside the truck.
IMG_5483_1_1.JPG
26 viewsWindows and the cast member were added and the assemblies have been glued together. Note the service window has been left open so the cast member can reach through. The truck has been posed in its location on East Center Street outside the Plaza Inn.
IMG_5593_3_1_1.JPG
26 viewsAn N-scale worker has been added here to show the relative size of the vehicle.
IMG_5596_2_1.JPG
26 views
IMG_5634_17_1.JPG
26 viewsThe other horse that came with the Preiser set did not really have the proper posture for pulling a Street-Car. Initially, the horse was just put into our box of unused details but after some time, I recalled seeing a horse being changed-out at the park and an idea struck. The horse was almost perfect for modeling one being led to -or from- the Street-Car stopped at Town Square. All I needed was a suitable N scale cast member figure. A little searching through our scale population turned up a Preiser German police officer that had the proper pose, a hat, and tie. A little carving was needed to turn his coat into a vest and then, with the correct paint, he looked just right for the job! I glued the horse and figure to a base made from .010" styrene so they would keep their spacing while I made the reins from .005" styrene sheet. I like the way this little scenario turned out and the scene adds more interest to our model.
IMG_4800_1_1.JPG
25 views
IMG_5582_2_1.JPG
25 views
IMG_5584_4_1.JPG
25 viewsYes, the corn dog truck is open and already there's a line for these delicious treats. I still have a few more details to add -like condiments, straws and napkins on the table- plus a few more figures. Already the scene on East Plaza Street is "alive" with activity. Creating these scenes is one of my favorite parts of modeling.
IMG_5597_3_1.JPG
25 views
IMG_5625_8_1.JPG
25 views
MVI_5005.AVI
November 2007, Dapper Dans Singing on the Horse-Drawn Streetcar25 views
21_Heart.mp3
Heart24 views
IMG_4969_1_3.JPG
24 views
IMG_5613_8_1.JPG
24 views
IMG_5635_18_1.JPG
24 views
plutig_9_9.JPG
24 viewsThe wonderful thing about Tiggers is...they're bright! The base will be cut away and a brass wire inserted in a hole drilled up into one paw to allow a clean installation into our diorama.
Sprite_10.jpg
24 views
Sprite_7~0.jpg
24 views
IMG_0465_1.JPG
23 views
IMG_2834_1_1.JPG
23 viewsThe Horse Drawn Street Cars have been on Main Street since opening day, July 17, 1955. The attraction was personally funded with Walt's own money and four Street Cars were built. Today, rarely more than two are employed on a given day. The park has used three breeds of draft horses to pull the cars: Clydesdale, Belgian and Percheron. Today, no Clydesdales are corralled at the Circle D ranch. All horses are official cast members and wear name tags. Also, all the harnesses are custom made and sized for each horse's comfort.
IMG_3845_8_1.JPG
23 viewsUnderside view of wiring for the lamp light. Gently pull the wiring to remove the bulb from the lamp.
IMG_4079_4_1.JPG
23 views
IMG_4969_1_1.JPG
November, 200723 views
IMG_5599_5_1.JPG
23 views
IMG_5600_6_1.JPG
23 views
IMG_6055_1.JPG
23 views
Sprite_8.jpg
23 views
Sprite_9.jpg
23 views
0907536-R1-022-9A_1_1.jpg
22 views
IMG_0779.jpg
22 views
08_When_I_See_An_Elephant_Fly.mp3
When I See An Elephant Fly21 views
cd2.jpg
21 views
IMG_4081_6_1.JPG
21 views
IMG_5544_5_1_1.JPG
21 viewsHere is the truck with the separate refrigerator positioned as they will be after I finish painting the street. The 'fridge' was fabricated from styrene with the lid handle made from .006" brass wire.
IMG_5583_3_1.JPG
21 views
4668.jpg
20 views
IMG_3168_1_1.JPG
20 views
IMG_3314_2_1.JPG
20 views
IMG_3507_1_1.JPG
20 views
IMG_3830_9_1.JPG
20 viewsThis is a view of a hole where a street lamp once was. We removed the street lamp by gently rocking it from side to side then pulling it from the base.
IMG_4027_1_1.JPG
20 views
IMG_5490_2_1.JPG
20 viewsThe truck has just a couple of more details needed to be complete.
IMG_5621_4_1.JPG
20 viewsFor our second Street-Car, I took a draft horse from a Preiser N scale wagon set. The wagon I bought came with a team of two horses. Tahnee felt the one with its head down looked more typical of the posture of Disneyland's steeds while drawing guests down Main Street. So, I clipped the supplied reins and carefully removed the supplied horse from the base. Here is a photo of the new horse hitched up.
IMG_5633_16_1.JPG
20 views
IMG_5635_20.JPG
20 views
IMG_6053_1.JPG
20 views
IMG_0759.jpg
19 views
IMG_3150_2_1.JPG
19 viewsLadies and Gentlemen, we present Orva, our favorite Horse Drawn Street-Car cast member. She's a beaut!
IMG_5479_4_1.JPG
19 viewsNow the truck has received basic painting.
plutig_9_7.JPG
19 viewsFirst, flourescent orange (Testors Model-Master #FS 28915) was used to replicate Tigger's luminous hide. Then, matte black stripes and gloss black eyes and snout complete this character.
scan0003.jpg
19 viewsThis is a photo taken in 1956 of the original Omnibus. Notice the firewall directly behind the hood and the lack of a windscreen. Note too the old six-pointed wheels distinguishing the original Omnibuses from the current ones.
scan0005.jpg
19 views
scan0015.jpg
The Last Photo of Walt & Mickey Together19 views
4669.jpg
18 views
cd1.jpg
18 views
IMG_3837_6_1.JPG
18 viewsAn original micro-lamp. These are easily replaced by simply pulling them down through the post and unplugging. To replace the bulb one must remove the plug and re-connect it to the new lamp's leads. A small piece of foam rubber (seen here to the right of the bulb) is gently pushed up the post after the lamp has been installed to keep the bulb in position.
IMG_3958_1_1.JPG
18 views
IMG_4588_1_1.JPG
18 views
IMG_5489_1_1.JPG
18 viewsThe headlights were fabricated from styrene rod, sheet stock and brass rod. The radiator surround has been painted brass while the rear-view mirrors and door handles have been added too. The mirror arms and door handles were made from .008" brass rod. Tiny holes were drilled to install them.
scan0002.jpg
18 viewsHere's Orva pulling the Street-Car with the special gold livery in celebration of Disneyland's 50th Birthday, July 17, 2005.
IMG_2490_2_1.JPG
17 views
IMG_3798_1_1.JPG
17 views
IMG_4684_17_1.JPG
17 views
IMG_5472_1_1.JPG
17 viewsConsulting my photos, I constructed the 'box' of the truck from .020 ABS and made the 'wood' trim from .010" X .020" styrene (the ABS is grey in color while the styrene is white).
IMG_5525_7_1.JPG
17 views
IMG_5627_10_1.JPG
17 viewsOne of our favorite horses currently working on Main Street is named Orva. She has a beautiful coat ranging from nearly pure white to almost black with light spots scattered amongst the main portion of her body. I tried to replicate this coloring and employ Orva on our model. We have a couple of photos of the real Orva in our "Disneyland's Horse Drawn Street-car" file.
IMG_5628_11_1.JPG
17 viewsNew reins were made from .008" brass wire and new draw bars from .012" brass wire. I also painted the square blinders over Orva's eyes and on our other horse too. I may try to fabricate some blinders from thin plastic sheet but I'll stick with the painted ones for now.
IMG_5929_1.JPG
17 viewsHere's its location in proximity to the Bank of Main Street.
MVI_5001.AVI
17 views
Sprite_7.jpg
17 views
IMG_0289.jpg
16 views
IMG_0762.jpg
16 views
IMG_5474_4_1.JPG
16 views
IMG_5480_5_1.JPG
16 views
img_1843.jpg
15 views
IMG_2806_1_1.JPG
15 views
IMG_3796_6_1.JPG
15 views
IMG_3801_4_1.JPG
15 views
IMG_4589_4_1.JPG
15 views
IMG_4969_1_2.JPG
15 views
IMG_5469_14_1.JPG
15 views
IMG_5481_6_1.JPG
15 views
IMG_5523_5_1.JPG
15 viewsI made the black diamond trim on the upper panels from brass photo-etched screen. Also, the white air conditioning unit on the roof was fabricated from styrene and installed.
dis_townband.JPG
14 views
IMG_0350.jpg
14 views
IMG_0773.jpg
14 views
IMG_0778.jpg
14 views
IMG_2800_1_1.JPG
14 views
IMG_3162_2_1.JPG
14 views
IMG_3368_1_1.JPG
14 views
IMG_4563_1_1.JPG
14 views
IMG_5475_3_1.JPG
14 viewsAt this point the basic assemblies (cab, box and chassis) are not glued together so windows and other details can be placed inside.
4672.jpg
13 views
guest_1004.jpg
13 views
IMG_0542.jpg
13 views
IMG_3144_1_1.JPG
13 viewsA 1910 car stereo and quadraphonic too! The Dapper Dans provide sweet harmonies for guests lucky enough to experience a ride with them.
IMG_3970_2_1.JPG
13 views
plutig_1.JPG
13 viewsMaking Tigger from Pluto was an idea that came while working on the Plaza Inn piece. I wanted to create a scene of a lucky young guest having a "My Disneyland Birthday" celebration on the Inn's dining patio area. These birthdays feature appearances by Disney characters and I needed one for this diorama. After looking over the Olszewski Fab Five pack, I decided on Pluto. However, it became clear that when installed on the Plaza Inn piece, Pluto's neutral tan color wouldn't stand out and the scene would go un-noticed when our model was viewed. Hmmmm. Looking over some photos Tahnee had shot of the Plaza Inn, the answer jumped right out at me. What we needed was a brightly costumed character and there is none more 'luminous' than the bright orange and black Tigger! Trouble was, we didn't have one. Looking at pluto with a bit more scrutiny, I concluded that it wouldn't be too difficult to convert this dog into a cat. Fortunately, we have purchased 'extra' Fab Five packs with the possibility these kinds of projects might arrise. We've used one of our Mickeys for a 50th Anniversary project on the Disneyland RR Main Street station piece. Well, I'm up to the challenge so, here goes.
IMG_0766.jpg
12 views
IMG_4575_3_1.JPG
12 views
IMG_5482_7_1.JPG
12 viewsThe cab is painted too and will cover the access to the corn dog preparation and service area in back.
plutig_2.JPG
12 viewsThese first two shots are for reference.
plutig_8.JPG
12 viewsA hole is drilled (no comments please!) to receive a tail made from .020" brass wire.
plutig_9_4.JPG
12 viewsA tail of brass wire 'installed.'
IMG_3113_1_1.JPG
11 views
IMG_5470_15_1.JPG
11 viewsA cowl was made from .060" styrene and placed between the hood and the cab.
IMG_5473_2_1.JPG
11 views
IMG_5524_6_1.JPG
11 views
IMG_5541_3_1_1.JPG
11 views
IMG_5542_4_1_1.JPG
11 views
plutig_3.JPG
11 viewsThe first step is to remove Pluto's ears and snout with a needle file and Dremel tool. (following sequence)
plutig_9_5.JPG
11 viewsPrimered with white matte enamel. White is necessary to keep the orange overcoat appearing really bright.
4674.jpg
10 views
IMG_3793_4_1.JPG
10 views
IMG_4574_1_1.JPG
10 views
plutig_9_8.JPG
10 views
IMG_0764.jpg
9 views
IMG_0765.jpg
9 views
IMG_2938_1_1.JPG
9 views
IMG_4688_21_1.JPG
9 views
IMG_5930_1.JPG
9 views
plutig_6.JPG
9 viewsNow this looks pretty scary, huh? I applied a 'drop' of Bondo putty over the head to begin the re-shaping process.
plutig_9_3.JPG
9 viewsThe ears are made from thin slices of .040 styrene rod secured with super glue.
4677.jpg
8 views
IMG_0763.jpg
8 views
img_1842.jpg
8 views
IMG_3297_1_1.JPG
8 views
IMG_3803_9_1.JPG
8 views
IMG_6051_1.JPG
8 views
plutig_9_6.JPG
8 views
scan0004.jpg
8 viewsHere's a photo of the second Omnibus and you can clearly see the cowl behind the hood and the windscreen. It's a bit puzzling to ponder the necessity for the subtle design differences. Perhaps it afforded additional legroom for tall drivers?
guest_1003.jpg
7 views
IMG_0761.jpg
7 views
IMG_3795_7_1.JPG
7 views
IMG_4687_20_1.JPG
7 views
IMG_5928_1.JPG
7 viewsThis is the souvenir stand which is located just to the right of the Bank of Main Street. It is constructed from styrene and includes N-scle brick and "car-siding" (from Evergreen Models) patterns.
plutig_9.JPG
7 views
plutig_9_1.JPG
7 viewsContinued refining of the head profile.
fabdis_2.JPG
6 views
guest_1005.JPG
6 views
IMG_4565_3_1.JPG
6 views
IMG_4690_22_1.JPG
6 views
IMG_5842_1.JPG
6 views
plutig_7.JPG
6 viewsSculpting the basic profile using a hobby knife and abrassive 'sanding sticks.'
4680.jpg
5 views
guest_1000.jpg
5 views
IMG_0287_1.JPG
5 views
IMG_4689_23_1.JPG
5 views
IMG_5839_1.JPG
5 views
IMG_5840_1.JPG
5 viewsThis is the souvenir stand that is located next to the Tour Guide Garden. It is interesting to note that the east and west stands are not mirror images of each other but have different construction details -especially concerning the cash register pedestals.
plutig_5.JPG
5 views
plutig_9_2.JPG
5 views
fabdis_1.JPG
4 views
guest_1001.jpg
4 views
guest_1002.jpg
4 views
plutig_4.JPG
4 views
IMG_4581_6_1.JPG
3 views
IMG_3154_1_1.JPG
2 views
IMG_3155_9_1.JPG
2 views
IMG_3156_8_1.JPG
2 views
IMG_4577_2_1.JPG
2 views
IMG_4579_4_1.JPG
2 views
IMG_5841_1.JPG
2 views
IMG_2880_1_1.JPG
1 views
IMG_2881_2_1.JPG
1 views
IMG_3159_5_1.JPG
1 views
IMG_3161_3_1.JPG
1 views
 
242 files on 1 page(s)

 
   
   

Choose your language: