Anaheim Groves Improvement District- About Us
Logo-Home   Home   FAQs   Blog   Forum   About_Us   Contact_Us   


   

Main Street U.S.A.

Includes Main Street Buildings and Music Files

 
 

Last additions
IMG_cc_1190.JPG
May 02, 2010
IMG_cc_1191.JPG
May 02, 2010
IMG_cc_1189.JPG
May 02, 2010
IMG_cc_1187.JPG
May 02, 2010
IMG_cc_1188.JPG
May 02, 2010
IMG_cc_1182.JPG
May 02, 2010
IMG_cc_1186.JPG
May 02, 2010
IMG_cc_1185.JPG
May 02, 2010
IMG_cc_1183.JPG
May 02, 2010
IMG_cc_1181.JPG
May 02, 2010
IMG_cc_1180.JPG
May 02, 2010
IMG_cc_1184.JPG
May 02, 2010
IMG_cc_1179.JPG
May 02, 2010
IMG_cc_1175.JPG
May 02, 2010
IMG_cc_1177.JPG
May 02, 2010
IMG_cc_1178.JPG
May 02, 2010
IMG_cc_1173.JPG
May 02, 2010
IMG_cc_1176.JPG
If you've taken note (pun), I've arranged and posed the guest figures to be drawn towards the direction of the piano and the wonderful notes being played at a rate of 32 per second. Who can play that fast, you might ask? Ragtime specialist Rod Miller! Rod's playing and delightful demeanor always got the attention of guests -many of them visiting the Park solely to hear him play!May 02, 2010
IMG_cc_1174.JPG
The couple sitting to the side of the piano (green and pink shirts) were inspired by our friends Sandy and Brian. May 02, 2010
IMG_cc_1170.JPG
May 02, 2010
IMG_cc_1172.JPG
May 02, 2010
IMG_cc_1171.JPG
May 02, 2010
IMG_cc_1169.JPG
May 02, 2010
IMG_cc_1168.JPG
Coke Corner is beginning to look alive with activity.May 02, 2010
IMG_cc_1167.JPG
The umbrellas have not been permanently installed yet to aid with the placing of figures and chairs.May 02, 2010
IMG_cc_1164.JPG
May 02, 2010
IMG_cc_1166.JPG
May 02, 2010
IMG_cc_1165.JPG
Close up view of the re-worked roof that joins up with the Plaza Pavilion. I used molded N scale shingle sections taken from an Atlas model RR structure and thinned them to about .020" thick. I then glued these 'veneers' to the original areas of the Olszewski sculpture. The trim -almost an exact match to the Park's- is photo-etched brass from Gold Medal Models. Note the upper 3rd tier (sans trim) that functions only to conceal some unsightly roof-top infrastructure (air conditioners, etc.).May 02, 2010
IMG_cc_1162.JPG
May 02, 2010
IMG_cc_1163.JPG
The re-worked roof (dark brown areas) of the Coke Corner piece.May 02, 2010
IMG_cc_1161.JPG
Because of the relocation of the Plaza Pavilion (set much farther back and elevated about 3/16") I had to re-work the roof of the Coke Corner piece to mate up with that of the Pavilion. It's not perfect but I'm satisfied with the fit. A large tree (growing here at the Park) will help to conceal where these two sculptures join.May 02, 2010
IMG_cc_1160.JPG
May 02, 2010
IMG_cc_1159.JPG
You can see how the new back stage area's roofline blends into that of the Alladin's Oasis. All I have to do now is thatch the roof.May 02, 2010
IMG_cc_1157.JPG
May 02, 2010
IMG_cc_1155.JPG
May 02, 2010
IMG_cc_1153.JPG
Some curbing and wood will help contain the refuse bins and proect the structure damage.May 02, 2010
IMG_cc_1158.JPG
May 02, 2010
IMG_cc_1156.JPG
May 02, 2010
IMG_cc_1154.JPG
Refuse bins (okay, dumptsters!) are resin cast units from Cal Freight and have been painted.May 02, 2010
IMG_cc_1152.JPG
I made a new marquee from a photo I took at the Park. It's more legible than the original.Mar 22, 2010
IMG_cc_1148.JPG
Mar 22, 2010
IMG_cc_1147.JPG
The colorful "It's Ragtime!" banner on the piano was made from a photograph I took at the Park.Mar 22, 2010
IMG_cc_1151.JPG
Mar 22, 2010
IMG_cc_1149.JPG
Mar 22, 2010
IMG_cc_1150.JPG
Mar 22, 2010
IMG_cc_1144.JPG
This shot reveals the keyboard detailing -there are actually black and white keys! Mar 22, 2010
IMG_cc_1146.JPG
Mar 22, 2010
IMG_cc_1143.JPG
Mar 22, 2010
IMG_cc_1145.JPG
Mar 22, 2010
IMG_cc_1142.JPG
Our completed pianist and stage.Mar 22, 2010
IMG_cc_1140.JPG
The three brick steps that lead to the Plaza Pavilion's dining terrace.Mar 22, 2010
IMG_cc_1138.JPG
The new "cast member only" doors with real brass kick-panels.Mar 22, 2010
IMG_cc_1139.JPG
I fabricated the three marquee supports from wire and drilled holes to accomodate them.Mar 22, 2010
IMG_cc_1137.JPG
To blend the Refreshment Corner sculpture into The Plaza Pavilion one, I 'll have to close-up the gap between them and make some adjustments to the roofline. Here I've extended the brick wall and constructed a wall extension from styrene and brass photo-etched screen. The landscaping has also been enhanced.Mar 22, 2010
IMG_cc_1141.JPG
Here's the new paving for West Plaza Street (Refreshment Corner dining area) made from N-scale brick paper and .005" styrene sheet. Each 'stone' was cut and laid individually!Mar 22, 2010
IMG_cc_1136.JPG
Here's our completed (less paint) pianist. I posed him so he'll be gazing towards Main Street. The stage was made from styrene stock and I used a razor saw to create the bunting texture (red) around the perimeter.Mar 22, 2010
IMG_cc_1131.JPG
The new stage with piano stool and piano. Mar 22, 2010
IMG_cc_1135.JPG
Hey, where's my piano!Mar 22, 2010
IMG_cc_1132.JPG
The piano stool is photo-etched brass from Micron-Art and is included with the piano kit.Mar 22, 2010
IMG_cc_1130.JPG
The umbrella locations have been determined and holes were drilled to accept the new poles made from .020" piano wire.Mar 22, 2010
IMG_cc_1133.JPG
I'm assembling our pianist from three different Preiser N-scale figures.Mar 22, 2010
IMG_cc_1134.JPG
The piano is a N-scale modified brass photo-etched model from Micron-Art. The height was cut down about 1/8" and cleaned-up with styrene sheet.Mar 22, 2010
IMG_cc_1129.JPG
The roof and walls have been painted.Mar 22, 2010
IMG_cc_1125.JPG
This is a shot of the original cast member doors.Mar 22, 2010
IMG_cc_1123.JPG
Finally, the last 'stone' (on the tip of my hobby knife) is laid!Mar 22, 2010
IMG_cc_1124.JPG
Mar 22, 2010
IMG_cc_1128.JPG
Mar 22, 2010
IMG_cc_1127.JPG
I inlaid a very fine photo-etched brass screen to cover the speaker opening in the roof above "Coke Corner."Mar 22, 2010
IMG_cc_1126.JPG
I modeled a pair of new "cast member only" doors with kick panels made from brass.Mar 22, 2010
IMG_pen_1110_16.JPG
Removal of the roof and back stage area is complete. I'll perform some 'clean-up' tasks with some sanding sticks before adding our new roof.Mar 06, 2010
IMG_pen_1110_14.JPG
Her's the arcade 'box' with the amusement machines intact. The back wall will be completely removed before this 'box' is re-installed so it will be illuminated like the rest of the buildings. We'll also add a couple of scale "guests" while we're at it.Mar 06, 2010
IMG_pen_1110_15.JPG
Mar 06, 2010
IMG_pen_1110_12.JPG
Mar 06, 2010
IMG_pen_1110_13.JPG
The arcade 'box' has been removed.Mar 06, 2010
IMG_pen_1110_11.JPG
As I've discovered working on the other Main Street pieces (Emporium for example), it's easier to model the back stge areas and roofs by removing everything except the facades of the pieces. With this piece, I have to be careful not to damage the actual Penny Arcade 'box' containing moviolas and Esmeralda too.Mar 06, 2010
pav_1111.JPG
Feb 10, 2010
pav_1112.JPG
Feb 10, 2010
cen_1117.JPG
Feb 10, 2010
IMG_pen_1121.JPG
Feb 10, 2010
IMG_pen_1120.JPG
Feb 10, 2010
IMG_pen_1117.JPG
The structure with the slanted roof (containing the restrooms at the Park) has been extended now and modeled to mate with that on the Emporium/New Century Jewelry piece.Feb 10, 2010
IMG_pen_1115.JPG
The pieces have now been boxed-in with the rear wall and roof made of .060" styrene sheet stock.Feb 10, 2010
IMG_pen_1119.JPG
This part of the back stage area supports some really heavy-duty air conditioning units that are situated up on the roof. Located bellow will be some other mechanical facilities and a cast member break area. The poles are brass rodding and the railing is photo-etched brass. This part of the model is removeable for the time being in order to facilitate adding details.Feb 10, 2010
IMG_pen_1118.JPG
Feb 10, 2010
IMG_pen_1113.JPG
Feb 10, 2010
IMG_pen_1114.JPG
Feb 10, 2010
IMG_pen_1116.JPG
Feb 10, 2010
IMG_pen_1111.JPG
The Carnation Cafe piece (right of photo) has been glued to the Coke Refreshment Corner/Penny Arcade piece (left of photo).Feb 10, 2010
IMG_pen_1112.JPG
To form the rear base and back stage area I've cut a piece of Ultraboard and attached it (super glue) to the Olszewski pieces. The Ultraboard fills-out the back stage area along the edge of our Main Street stage (platform).Feb 10, 2010
IMG_emp_1140.JPG
Feb 10, 2010
IMG_cc_1122.JPG
Refreshment Corner has been completely cleared for modification. Re-grading of West Plaza Street (white area in lower left) has been completed to transition the sidewalk and street smoothly into Main Street's elevation. Gone are the flower planters and the Refreshment Corner's ornate metal entryway. The planters and metal structure will be repositioned as part of the modifications.Feb 10, 2010
IMG_cc_1119.JPG
Feb 10, 2010
IMG_cc_1121.JPG
Feb 10, 2010
IMG_cc_1117.JPG
Feb 10, 2010
IMG_cc_1120.JPG
The back stage area behind Refreshment (Coke) Corner is being constructed. This multi-story building occupies a key location between Main Street and Adventureland, providing facilities for both realms. There is a small loading dock for the Plaza Pavilion/Tahitian Terrace kitchen and facilities for entertainers were built when the Tahitian Terrace show (featuring Polynesian dancers) began in 1962. In 1993, the Tahitian Terrace became Aladdin's Oasis and even more additions and remodelling of this structure took place.Feb 10, 2010
IMG_cc_1118.JPG
The new rear wall and roof has been added. These are made from .060" styrene sheet stock.Feb 10, 2010
IMG_cc_1113.JPG
Removal of the last remaining material is performed with a belt and disc power sander. Feb 10, 2010
IMG_cc_1111.JPG
The roof and entire 'back stage' portion of the piece are carefully removed with a bandsaw. This will make modifications to these areas easier.Feb 10, 2010
IMG_cc_1115.JPG
A piece of Ultraboard (white object) has been cut to fill-out the back stage area to the edge of our Main Street stage/module. This is glued to the Refreshment Corner and Carnation Cafe facades.Feb 10, 2010
IMG_cc_1114.JPG
The same operations to remove material has been performed on the Carnation Cafe piece (to the left of the photo). The two pieces have been glued together to form a single unit encompassing this block of Main Street.Feb 10, 2010
IMG_cc_1112.JPG
This is what's left after the bandsaw operation.Feb 10, 2010
IMG_cc_1116.JPG
White styrene stips are used to designate where the new rear walls will go.Feb 10, 2010
IMG_6111.JPG
Jan 28, 2010
IMG_6113.JPG
Jan 28, 2010
IMG_6112.JPG
Jan 28, 2010
ts_1111.JPG
Jan 28, 2010
IMG_trz_1126.JPG
Jan 28, 2010
img_cin_141.JPG
Jan 28, 2010
cen_1112.JPG
Jan 28, 2010
cen_1116.JPG
Jan 28, 2010
cen_1115.JPG
The speaker cover was covered with loosly woven ribbon to conceal the speaker after it's been painted.Jan 28, 2010
cen_1113.JPG
Jan 28, 2010
cen_1114.JPG
To make the speaker 'grill,' I used .040" styrene and cut it to fit the roof outline above the jewelry shop. I then marked the opening to be cut out.Jan 28, 2010
cen_1111.JPG
A 20mm speaker is added to the roof of the New Century jewelry shop to emit the sound of the Omnibus horn sound-effect when the bus (on its south-bound leg to Town Square) triggers a reed switch hidden in the Main Street roadway (the actual sound is stored on a audio playback chip board). One of these speakers will also be installed in the roof on the other side of the street (probably above the Disney Clothiers) to sound when the bus is on its north-bound leg.Jan 28, 2010
IMG_emp_1137.JPG
This overhead view shows the completed construction. Painting and detailing are next.Jan 28, 2010
IMG_emp_1139.JPG
The structure with the sloping roof (actually housing the restroom facilities at the end of west Center Street) is only about 2/3rds complete because it overlaps the back stage area of the Carnation Cafe piece -which will be worked on next.Jan 28, 2010
IMG_emp_1135.JPG
The roof extension has been painted to blend with the pre-existing one on the sculpture.Jan 28, 2010
IMG_emp_1138.JPG
The main back stage walls are painted a pale green on the west side structures to help camoflage them from being viewed by guests on the nearby Jungle Cruise.Jan 28, 2010
IMG_emp_1136.JPG
Two doors installed. These will be painted grey later.Jan 28, 2010
IMG_emp_1134.JPG
A speaker will be installed in the roof to play tracks from the "Five Alarm" musical act that performs between the Emporium and Firehouse.Jan 28, 2010
IMG_emp_1133.JPG
The rear of the Emporium/New Century jewelry/clock shop pieces. Notice that the Bondo 'paving' was completed before the shorter extension (to the left) was added.Jan 28, 2010
IMG_emp_1131.JPG
Jan 28, 2010
IMG_emp_1129.JPG
A little spot putty and sanding blends the overlay into the Olzewski sculpture.Jan 28, 2010
IMG_emp_1132.JPG
Jan 28, 2010
IMG_emp_1130.JPG
There is a false roof extension (scenic blind) that I suspect was necessary to prevent guests from viewing unsightly roof details from accross Town Square when standing on the elevated portion of the rear of the Main Street train depot. It was constructed entirely of styrene pieces.Jan 28, 2010
IMG_emp_1127.JPG
Here the overlay has been installed.Jan 28, 2010
IMG_emp_1128.JPG
Jan 28, 2010
IMG_emp_1125.JPG
This is the exterior overlay (.020" styrene) that spans the rear wall between the Olszewski piece (Emporium) and the new construction. N-scale windows from Grandt Line were modified and installed.Jan 28, 2010
IMG_emp_1123.JPG
Red Bondo spot putty is used to fill some minor imperfections.Jan 28, 2010
IMG_emp_1126.JPG
To allow the four windows in the overlay to be illuminated, an opening needed to be cut in the wall.Jan 28, 2010
IMG_emp_1124.JPG
Jan 28, 2010
IMG_emp_1120.JPG
Jan 28, 2010
IMG_emp_1122.JPG
As per my photos, the center wall has a door allowing roof access.Jan 28, 2010
IMG_emp_1119.JPG
The main roof (from .060" styrene sheet stock) has been installed.Jan 28, 2010
IMG_emp_1117.JPG
The base of Ultra-Board has been attached to the storefronts and all the walls making up the exterior have been added. Notice I've added a strip of .060" X .250" styrene along the base of the walls for strength and also to serve as a buffer to ease with applying the Bondo putty to 'pave' the back stage area. This buffer allows me to spread the putty without having to worry about getting it on the walls or scuffing them during the sanding operation.Jan 28, 2010
IMG_emp_1118.JPG
The inside of the New Century jewelry/clock shop was relieved with a Dremel tool to allow a 20mm speaker to be recessed. The speaker will play the sound of the Omnibus horn when triggered from a reed switch hidden in the roadway below.Jan 28, 2010
IMG_emp_1116.JPG
Here I've begun adding the new exterior walls made from .060" syrene sheet. I chose this thickness for strength (okay, I have a bunch, too).Jan 28, 2010
IMG_emp_1121.JPG
.040" styrene pieces are installed to clean-up the appearance of the back of the Emporium.Jan 28, 2010
IMG_emp_1111.JPG
Based on my experience with modifying the other pieces (mostly the Opera House-Mad Hatter-Bank piece), I decided it would be easier to construct and modify the roofs and backstage areas by removing these areas altogether with my band saw. This is the result of the band saw process.1 commentsJan 17, 2010
IMG_emp_1113.JPG
After the band saw operations, some refining and removal of material in some of the tighter corners was done with a Dremel tool. The piece is now prepared and ready for the modifications.Jan 17, 2010
IMG_emp_1114.JPG
Jan 17, 2010
IMG_emp_1115.JPG
Jan 17, 2010
IMG_emp_1112.JPG
Jan 17, 2010
IMG_trz_1125.JPG
This is the speaker-tree at the west end of the station (first from the left). The speakers are wired to a digital chip-board (from Cowlacious Designs) and the station arrival/departure announcements have been recorded onto the chip. When triggered, the announcements are heard. The sound quality is pretty darn good ...it's also really cool! "Your attention please. The Disneyland limited now arriving from a trip aroud Walt Disney's Magic Kingdom..."Jan 16, 2010
IMG_trz_1123.JPG
This is the speaker-tree at the east end of the station.Jan 16, 2010
IMG_trz_1122.JPG
3/32" diameter holes were drilled through the station base to allow the wires to pass through and so the trees could be 'planted.' Here, the two completed speaker-trees have been installed. Can you guess which ones they are?Jan 16, 2010
IMG_trz_1124.JPG
East speaker-tree as viewed from outside the bermJan 16, 2010
IMG_trz_1121.JPG
1 commentsJan 16, 2010
IMG_trz_1119.JPG
With the tree armatures painted (light grey and tan), I was ready to apply the poly-fiber (available from JTT Tree or Woodland Scenics) to them. The poly-fiber was cut and then stretched and pulled to give the trees shape and to create an "airy" see-through look. The poly-fiber was attached to the armatures using "Hob-E-Tac" adhesive from "Woodland Scenics." Jan 16, 2010
IMG_trz_1118.JPG
Jan 16, 2010
IMG_trz_1120.JPG
Once the poly-fiber is in place the foliage was added by spraying the trees with clear flat laquer (Testors "Dullcote #1260) and then sprinkling on finely ground green foam.Jan 16, 2010
IMG_trz_1117.JPG
Jan 16, 2010
IMG_trz_1115.JPG
The pair of trees ready to be painted prior to adding foliage.Jan 16, 2010
IMG_trz_1114.JPG
Jan 16, 2010
IMG_trz_1112.JPG
The tree trunk had a groove cut into it to recess and carry the speaker wires which will pass through a hole drilled through the layout base where the trees are located. In this photo, the wires have been secured to the trunk with CA glue and then a little Bondo putty applied to completely hide the wires and blend them into the trunk.Jan 16, 2010
IMG_trz_1113.JPG
Jan 16, 2010
IMG_trz_1116.JPG
To help conceal the speakers I applied a little 'camoflage' of matt green paint. I discovered later that I could just LIGHTLY airbrush the speakers with the same paint without any loss of audio performance.Jan 16, 2010
IMG_trz_1111.JPG
I want to have the sound effects of the station announcements play when a train arrives at the station -just like at the Park. To accomplish this, I decided to conceal the speakers in the trees closest to each end of the station platform (at Disneyland, the loudspeakers that broadcast these announcements are located at the end of each platform). Here I'm making a "speaker tree" by installing a 20mm. speaker into the upper reaches of a "Woodland Scenics" tree armature. Two of these speaker-trees are needed. The branches were bent in a way to cradle the speaker and a few small drops of CA (super glue) were used to secure it.Jan 16, 2010
img_cin_140.JPG
Speaker cover in place above the Disney Showcase. These worked out very well in concealing the speakers.Jan 16, 2010
img_cin_139.JPG
The speaker cover in place above the Hotel Marceline.Jan 16, 2010
img_cin_138.JPG
These are the speaker covers for the Hotel Marceline (on left) and the Disney Showcase locations. They were made from .040" styrene sheet and covered with an open weave ribbon, then painted.Jan 16, 2010
img_cin_137.JPG
The speaker has been installed above the Hotel Marceline. Sound effects of "bath time" will be played here.Jan 16, 2010
scm_118.JPG
Guests are starting to be drawn to Donald and the happy sounds of the "Main Street Straw Hatters."Dec 27, 2009
scm_119.JPG
A clear shot showing a man about to pick up a dollar bill he spotted on the sidewalk. The unsuspecting man is about to be tricked by the young boy, sitting on the stairs, who recently visited the Magic Shop- hmmm I wonder what trick the boy bought from the Magic Shop. Looks like the man fell for it- hook, line, and sinker!Dec 27, 2009
scm_117.JPG
The finished lattice-workDec 27, 2009
img_cin_133.JPG
Dec 27, 2009
img_cin_135.JPG
Here's the "cigar store Indian" at the curb in front of the, er, "20th Century Music Company." Huh? It occured to me that Park guests under 30 years of age probably have no idea why this Indian sculpture is here on Main Street. The music store was originally a tobacco shop until 1990. After the change of merchandise type, the Indian has defiantly remained standing proud with his gaze directed towards distant Frontierland. Probably just a coincidence, I suppose.Dec 27, 2009
img_cin_136.JPG
The Main Street Lockers facility is very busy today.Dec 27, 2009
img_cin_132.JPG
The completed "cigar store Indian." Dec 27, 2009
img_cin_131.JPG
Can you guess what I'm making here?1 commentsDec 27, 2009
img_cin_134.JPG
This view shows the new window pane for the door next to the cinema. It was made by reducing a photograph. Dec 27, 2009
scm_114.JPG
Three flower planters installed.Dec 27, 2009
scm_112.JPG
This is one of three flower planters I made for the patio area from various styrene strips.Dec 27, 2009
scm_115.JPG
Finally the flowers have bloomed above the music shop. Dec 27, 2009
scm_116.JPG
This view displays the paintwork done to the Disney Showcase: all of the awnings have been re-colored and the roof has been painted copper with jade 'weathering' effects.Dec 27, 2009
scm_111.JPG
Here's a shot of one of the four street lamps that are required with this block of buildings (Disney Showcase and Market House) which has had flower 'baskets' added. The 'baskets' are nothing more than 1/8" X 3/32" slices of styrene rod which were drilled with a #80 bit, painted flat green and glued onto the cross-rods on the posts. They were then covered with fine green scenic foam before two colors of 'flowers' were added. These will add a lot of color down Main Street which will help 'pull' the pink shades of Sleeping Beauty castle towards Town Square. The lamps are Marklin #601224 Z-scale accessories and -amazingly- do light up!Dec 27, 2009
scm_113.JPG
I'm installing the photo-etched brass and styrene lattice-work above the cast member area. It has yet to be painted.Dec 27, 2009
img_cin_128.JPG
A little brain teaser for you: what item at the Park is missing from this photo? (hint: it is not included with the Olszewski piece. Looks like I'm in for another fun little side project!) The guest leaning against the Cinema wall under the music shop awning helps to obscure an unsightly gap where the Disney Showcase and Market House pieces come together. Dec 27, 2009
img_cin_127.JPG
Dec 27, 2009
img_cin_130.JPG
I added a couple of theater-goers heading into the Cinema for some laughs at the old Disney Mickey Mouse cartoons shown inside. Laughs, and to soak up some air-conditioning too! Notice the new graphics on the marquee and the addition of the promotional banners.Dec 27, 2009
img_cin_129.JPG
Way to go, lady! Bags full of Olszewski pieces I hope! I just had to add several window shoppers peering into our favorite shop, Disneyana, of course!Dec 27, 2009
img_cin_126.JPG
Photo-etched brass trim installed along the roof edges. The original flag pole base support was cut away and a hole was drilled to insert the pole into.Dec 27, 2009
img_cin_125.JPG
Dec 27, 2009
img_cin_124.JPG
Dec 27, 2009
img_cin_120.JPG
Dec 27, 2009
img_cin_121.JPG
The new locker facility and drinking fountain/cast member gate are just about ready to install.Dec 27, 2009
img_cin_119.JPG
Guests milling about the Market House.Dec 27, 2009
img_cin_122.JPG
Dec 27, 2009
img_cin_118.JPG
I always like to have some fun with the placement of model guests, and here's another example. The selection of commercially available model railroad figurines is pretty good in N-scale (about half of what is available for H:O-scale) but it still is challenging to use some that are intended to populate RR station platforms or bus-stops because many are made burdened with luggage for extended rail journeys. Well, I employed a bit of tongue-in-cheek here, and placed a bunch heading for the Main Street Lockers to store all that extra cumbersome baggage in order to better enjoy their Park visit. 1 commentsDec 27, 2009
img_cin_123.JPG
Dec 27, 2009
plaza_inn_113.jpg
Vacationland, Fall 1965Dec 24, 2009
plaza_inn_112.jpg
Vacationland, Fall 1965Dec 24, 2009
plaza_inn_111.jpg
Vacationland, Fall 1965Dec 24, 2009
op_dis_111.jpg
Dec 13, 2009
img_cin_117.JPG
Dec 06, 2009
img_cin_111.JPG
Dec 06, 2009
img_cin_114.JPG
The 'ring' on the ground is a planter where a large tree will go which gives shade to this area.Dec 06, 2009
img_cin_116.JPG
Dec 06, 2009
img_cin_115.JPG
Dec 06, 2009
img_cin_112.JPG
Dec 06, 2009
img_cin_113.JPG
Dec 06, 2009
IMG_6111_1.JPG
Here the flower planter above the music shop has had green finely ground scenic foam (JTT Tree) applied but the flowers have yet to bloom.Dec 06, 2009
IMG_6112_1.JPG
This is an overhead view of the block I'm working on. I have previously expoxied the "Disney Showcase" and "Market House" pieces together -the Showcase is to the upper left with the Market House in the upper right. The large rectangular structure in the lower right is the new locker facility with the roof yet to be painted. If you've been following the progress over the months you'll remember that I constructed a locker facility before. When the project grew from a standard Olszewski Main Street, USA Platform to a model of the entire Park, we now had room for a 'full-size' model of this building and expanded back stage areas on our custom built module. A new facade of the locker facility is was neccessitated too, and this can be viewed in the "Modified Market House" file.Dec 06, 2009
IMG_6101_1.JPG
The courtyard has been re-paved with brick paper and the structural addition with the cast member doors and globe lamps to the right is complete. The planters and other courtyard details will be added soon. I'm probably going to add another character/guest scenario here but I haven't decided on which it will be yet.Dec 06, 2009
IMG_6100_2.JPG
Donald and the Main Street Straw Hatters.Dec 06, 2009
IMG_6096_1.JPG
Stairways to allow roof access and railings have been installed. The free-standing rectangular building is a cast member break area.Dec 06, 2009
IMG_6100_1.JPG
The green object at the sidewalk edge is the base where a Marklin 'gas' lamp will be inserted.Dec 06, 2009
IMG_6098_1.JPG
The structure to the right of the photo is the locker facility (south side). There is a short platform with access to what I speculate to be a maintenance room which contains air-conditioning units and main computers for the locker area.Dec 06, 2009
IMG_6097_1.JPG
The doorway next to the stairway leads to the Disneyana shop -certainly one of our favorites!Dec 06, 2009
IMG_6099_1.JPG
I have installed Donald and the 6-piece ensemble "The Main Street Straw Hatters" where I photographed them performing at the Park. Guests enjoying the entertainment will be added soon. You can see photos of how I created this ensemble in the "Modified Disneyland Band" file. Donald, of course, is from the Olszewski "Fab Five" set but I added a small drum and a drum stick to his 'wings.' Dec 06, 2009
sc_112.jpg
Dec 06, 2009
sc_111.jpg
Dec 06, 2009
IMG_6094_1.JPG
This view shows a complete repainting of all the awnings on the Disney Showcase storefront.Sep 28, 2009
IMG_6095_1.JPG
This view shows the new roof shingles. The original roof texture wasn't molded crisply on our piece. I sanded the original surface smooth and then cut pieces to fit from a plastic N-scale shingle sheet. Before installing the pieces I sanded them to about .015" thick to preserve the original look and prevent the roof from appearing too bulky. I then applied them with CA glue.Sep 28, 2009
IMG_6091_1.JPG
The back stage offices, restrooms and storage structures are complete. The freestanding rectangular structure towards the bottom of the photo is a cast member break area. The hole for a 1.5" speaker has been cut into the roof of the Disney Showcase store. The speaker will play music from the six piece ensemble that will be performing on the sidewalk in front of the Disney Showcase.Sep 28, 2009
IMG_6093_1.JPG
Although not too easy to see, I made a panel from styrene that covers up the lower portion of the side of the Cinema's brick wall. It appears under the awning of the New Century Music shop and has been painted two-tone grey to match the lower portion of the Cinema. The brick wall does not extend all the way down to the sidewalk.Sep 28, 2009
IMG_6088_1.JPG
The rear facades have been cleaned-up (no expensive brick work back stage) by applying thin styrene sheet stock. Offices and other structures are taking shape. The 'dark' door is the rear of the Disneyana shop.Sep 28, 2009
IMG_6089_1.JPG
The work on the back stage area is progressing. The appearance of the roofs has been cleaned up by eliminating several of the outlines. Offices, cast member restrooms and storage structures are taking shape. All original landscaping and brick textured walls are gone. Sep 28, 2009
IMG_6087_1.JPG
I've added styrene strips along the roof outlines so I can glue styrene sheet over them to clean-up and eliminate several of the roof outlines -there just aren't that many individual roof sections up there :>)Sep 28, 2009
IMG_6086_1.JPG
This is the new wall with fancy cast member door that will go on the right side of the courtyard. The globe lamps have been fabricated too.Sep 28, 2009
IMG_6085_1.JPG
Speaker installed.Sep 28, 2009
IMG_6084_1.JPG
A 1.5" hole has been cut for a speaker.Sep 28, 2009
IMG_6083_1.JPG
With all the flowers and details completed all that's left is to close in the balcony with railing.Sep 28, 2009
IMG_6082_1.JPG
Sep 28, 2009
IMG_6081_1.JPG
Flower pots and photo-etched railing being installed.Sep 28, 2009
IMG_6078_1.JPG
Filling the gap with grooved styrene sheet stock.Sep 28, 2009
IMG_6079_1.JPG
Photo-etched table and chairs added on the balcony.Sep 28, 2009
IMG_6076_1.JPG
I've removed the original railings so I can add details to the baconies.Sep 28, 2009
IMG_6075_1.JPG
Here is the new position of the courtyard area. You can see the 3/8" gap on the left side of the photo.Sep 28, 2009
IMG_Opera_1215.JPG
Sep 04, 2009
IMG_Opera_1214.JPG
After some careful sanding, the gap area will be covered with some brick paper to completely conceal this joint.Sep 04, 2009
IMG_Opera_1213.JPG
Once the Opera House piece was completed it was installed permanently on the layout. The gap between the Main Street train station piece (to the right) and the Opera House is now filled with Bondo.Sep 04, 2009
IMG_Opera_1212.JPG
Sep 04, 2009
IMG_Opera_1211.JPG
Sep 04, 2009
IMG_Opera_1209.JPG
Sep 04, 2009
IMG_Opera_1208.JPG
Before installing the piece permanently on the layout I took it out into the sunlight to take a couple of photos.Sep 04, 2009
IMG_Opera_1210.JPG
This view is intended to show the "restrooms - ATM" sign just to the left of the souvenir stand and over the left shoulder of the guest with the pink hat.Sep 04, 2009
IMG_6045_1.JPG
Sep 04, 2009
IMG_6048_1.JPG
A bit more challenging was the separation of the old coffee shop and "site of future sites" portion. This is necessary (for me) in order to re-position this part about 3/8" farther back from the street and to fabricate a couple of cast member only doorways.Sep 04, 2009
IMG_6049_1.JPG
Once I had the main portion removed I also removed the right extension. This will be fabricated and made about 3/8" longer and include a couple of doorways. The patio area with the trees and flower boxes will go next.Sep 04, 2009
IMG_6046_1.JPG
It's okay if the band sawing mars the rear of the buildings as these will all be re-modeled anyway.Sep 04, 2009
IMG_6044_1.JPG
Well, about a year and a half has passed since I last worked on this piece. I decided that before this piece was installed on the model I wanted to 'adjust' the area facing towards the Opera House. This would require employing my band saw to make the changes. Here, the saw's 'laser' guide is lined up where I'm going to remove the landscaping on the rear of the piece. Having been a cast member at the park, I can tell you the appearance of the backstage area isn't anything like the utopian look of the standard pieces (you're shocked I can tell). I aim to represent the back stage areas a bit more accurately and, therefore, I have to remove these green patches from the back of the structures.Sep 04, 2009
IMG_6047_1.JPG
The rear landscaping is gone with two cuts.Sep 04, 2009
IMG_Opera_1207.JPG
Aug 23, 2009
IMG_Opera_1206.JPG
Here I'm testing the amber Marklin gas lamps that were installed to the sides of the Opera House entrance. The Opera House-Mad Hatter-Bank of Main Street piece is nearly ready to install on the layout and the lamps were one of the very first enhancements added. I needed to be sure they still worked!Aug 23, 2009
IMG_Opera_1205.JPG
Finally, Mary and Bert have attracted the attention of nearby guests -even the romantic couple on the bench have now noticed the presence of the famous pair. As Mary and Bert pose for a photo, a young boy's parents try to coax their slightly shy son to meet them. At this point there are 43 figures on the Opera House piece. 26 are visable here.Aug 22, 2009
IMG_Opera_1204.JPG
Aug 22, 2009
IMG_Opera_1203.JPG
Aug 22, 2009
IMG_Opera_1202.JPG
Aug 22, 2009
IMG_Opera_1201.JPG
Aug 22, 2009
IMG_Opera_1200.JPG
Aug 22, 2009
IMG_Opera_1199.JPG
A decent view of the trees in front of the timber retaining wall.Aug 22, 2009
IMG_Opera_1198.JPG
Aug 22, 2009
IMG_Opera_1197.JPG
Aug 22, 2009
IMG_Opera_1196.JPG
Aug 22, 2009
IMG_Opera_1195.JPG
Aug 22, 2009
IMG_Opera_1194.JPG
Aug 22, 2009
IMG_Opera_1193.JPG
Aug 22, 2009
IMG_Opera_1192.JPG
Aug 22, 2009
IMG_Opera_1191.JPG
Aug 22, 2009
IMG_Opera_1190.JPG
Aug 22, 2009
IMG_Opera_1189.JPG
Aug 22, 2009
IMG_Opera_1188.JPG
Notice how the cast member doorway connects between the retaining wall and the theater terminating the pathway for guests. Aug 22, 2009
IMG_Opera_1187.JPG
Aug 22, 2009
IMG_Opera_1186.JPG
Aug 22, 2009
IMG_Opera_1185.JPG
The "Wizard" heads off to Fantasyland. He entered the Mad Hatter shoppe with the simple intention of replacing his baseball cap he left back at the hotel. However, once inside, the boy inside him was more persuasive with his selection than his normally stronger practical side, so, he chose a Mickey "Fantasia" wizard hat. And why not? After all, Disneyland is for the young and the young at heart.
Aug 22, 2009
IMG_Opera_1184.JPG
With a small crowd of guests gathered around, Mary and Bert pose for a photo. My placement of the star couple was determined by how they would appear when viewed from the perimeter of the finished model. I wanted them to be easily visable and not hidden under a awning or obscured by the trees. Many of the views in the photographs on this website will not be possible when the model is complete, therefore, we shoot them as we progress to document details that can't be seen with these angles and extreme close-ups ever again. Aug 22, 2009
IMG_Opera_1183.JPG
Three kids -all wearing Mickey ears- wave to passing Main Street vehicles.Aug 22, 2009
IMG_Opera_1182.JPG
Aug 22, 2009
IMG_Opera_1181.JPG
The wife looks a bit surprised at her husband's new Mad Hatter hat. After all their years together they're still discovering things about each other they never knew before.Aug 22, 2009
IMG_Opera_1180.JPG
Aug 22, 2009
IMG_Opera_1178.JPG
All wearing their newly purchased 'ears,' a family hurries from the shoppe because Dad has spotted Mickey Mouse in front of the Disney Showcase across the street.Aug 21, 2009
IMG_Opera_1176.JPG
Aug 21, 2009
IMG_Opera_1177.JPG
Aug 21, 2009
IMG_Opera_1174.JPG
At this stage the arrangement of the figures is about 75% complete. When done, Mary Poppins and Bert won't look so alone but I have to work from the building facades out towards the curbing.Aug 21, 2009
IMG_Opera_1175.JPG
Aug 21, 2009
IMG_Opera_1173.JPG
Aug 21, 2009
IMG_Opera_1172.JPG
Aug 21, 2009
IMG_Opera_1170.JPG
Aug 21, 2009
IMG_Opera_1171.JPG
Aug 21, 2009
IMG_Opera_1169.JPG
A young couple spots Mary Poppins and Bert. The movie, released in 1964 and 20+ years before they were born, is, nevertheless, one of their favorite Disney films. I like it too. Aug 21, 2009
IMG_Opera_1168.JPG
Aug 21, 2009
IMG_Opera_1167.JPG
Aug 21, 2009
IMG_Opera_1166.JPG
Aug 21, 2009
IMG_Opera_1165.JPG
This is a good view showing how narrow the pathway is between the south side of the Lincoln theater and the timber retaining wall (mostly hidden by the line of tree plantings).Aug 21, 2009
IMG_Opera_1164.JPG
Aug 21, 2009
IMG_Opera_1163.JPG
Aug 21, 2009
IMG_Opera_1162.JPG
Aug 21, 2009
IMG_Opera_1161.JPG
Aug 21, 2009
IMG_Opera_1160.JPG
Aug 21, 2009
IMG_Opera_1159.JPG
An overall view of the Opera House piece.Aug 21, 2009
IMG_Opera_1158.JPG
The south side wall of the Bank and Opera House is almost hidden with dense landscaping.Aug 21, 2009
IMG_Opera_1157.JPG
Aug 21, 2009
IMG_Opera_1156.JPG
A close-up view of the under construction souvenir boothAug 21, 2009
IMG_Opera_1155.JPG
Aug 21, 2009
IMG_Opera_1154.JPG
At this point the landscaping around the south side is taking shape. I made the piece able to slide out for ease of work in this area because of the tight confines around the narrow walkway to the restrooms, the souvenir booth, and the RR right-of-way.Aug 21, 2009
IMG_Opera_1153.JPG
Additional globe lamps and an ATM machine on the south side of the Bank of Main Street. An ATM machine in 1910? I don't think so...Aug 21, 2009
IMG_Opera_1152.JPG
Aug 21, 2009
IMG_Opera_1151.JPG
Aug 21, 2009
IMG_Opera_1150.JPG
Aug 21, 2009
IMG_Opera_1149.JPG
The new (future?) Fairy Godmother and her brother with the Donald Duck cap are excitedly expressing their desire to visit their favorite attractions. Of course, the two are not in agreement of which they'll ride first. With her own desire to slow the pace of the day, mom points out, "Oh, Look over there! There's Mary Poppins!" Aug 21, 2009
IMG_Opera_1148.JPG
Aug 21, 2009
IMG_Opera_1147.JPG
Mary and Bert have taken up their pose and passers-by are starting to take notice.Aug 21, 2009
IMG_Opera_1146.JPG
A young man has just purchased a Goofy hat and is rejoining his friends outside. His girlfriend with the pink blouse and hands on her hips thinks he looks, well, goofy.Aug 21, 2009
IMG_Opera_1145.JPG
It's a busy day at the Mad Hatter Shoppe. There are eight guests with their newly purchased hats.Aug 21, 2009
IMG_Opera_1144.JPG
Mary Poppins and Bert will be featured on the Opera House piece so I fabricated the pair by modifying and combining several Preiser figures. Bert's cane is made from .008" brass wire.Aug 21, 2009
IMG_Opera_1143.JPG
Okay, since the Mad Hatter shoppe sells, uh, hats, I wanted to create some scenarios with the figures around the storefront. This required the modeling of some different headwear on several 'guests.' From left to right: a family (3) with Mickey ears; a man with a Goofy hat; a man with a Mad Hatter top hat; a man with a Fantasia style Mickey wizard hat; a little boy with a Mickey costume. Not shown is a boy with a Donald Duck cap and a girl with a Fairy Godmother style hat with veil/cape. Final painting has yet to be done.Aug 21, 2009
IMG_Opera_1142.JPG
Aug 21, 2009
IMG_Opera_1141.JPG
Aug 21, 2009
IMG_Opera_1139.JPG
Aug 21, 2009
IMG_Opera_1140.JPG
The earthen berm between the RR tracks and the Opera House piece is formed from poly-styrene insulating foam.Aug 21, 2009
IMG_Opera_1138.JPG
In front of the timber retaining wall, sapplings (JTT Tree branches) have been planted between each of the wall's poles.Aug 21, 2009
IMG_Opera_1137.JPG
I added a photo-etched brass ladder to provide some extra detailing on the roof.Aug 21, 2009
IMG_Opera_1136.JPG
Between the south side of the Lincoln theater and the RR right-of-way berm there is a timber retaining wall. Unfortunately, the photo I took of its fabrication on my workbench didn't come out and, therefore, it is difficult to view here. The backing of the wall was made from .040" styrene sheet and faced with strips of bass wood. I used styrene to back the wall because I would be applying water-based landscaping materials (Sculpy Modeling Compound and matte-medium) and needed to prevent any possible warping of the wood. The poles are bass wood dowels. The completed wall was stained brown and weathered with a black India ink wash. In this photo the wall has not yet been built to its full length.Aug 21, 2009
IMG_Opera_1135.JPG
Pink and white flowers have finally bloomed in the beds.Aug 21, 2009
IMG_Opera_1133.JPG
The sign is removable in case I want to update (or back-date) the advertised show.Aug 21, 2009
IMG_Opera_1134.JPG
I had an idea for some special figures to pose around the "Mad Hatter" shoppe and -since it would be a focal point of this side of Town Square- decided to detail the sign by making a hat from styrene and crafting a hoop from .010" brass wire. I drilled out the original hat with my Dremel tool using a 1/8" bit. The actual "the Mad Hatter" sign was taken from a photograph. I would add the chains which run from the facade to the roof of the awning later.Aug 21, 2009
IMG_Opera_1132.JPG
This is the sign that is placed in front of the Opera House when the attraction is not well attended. It is fabricated from styrene and some ornate photo-etched brass trim. The poster is for the "Disneyland: The First 50 Magical Years" show and features Steve Martin and Donald Duck. This show is now soon to be replaced by a new Lincoln presentation to observe our 16th President's 200th birthday. It is scheduled to open Fall of 2009.Aug 21, 2009
IMG_Opera_1131.JPG
A woman is using one of the pay-phones located next to the cast member entrance. Her boyfriend is urging her to get off the phone so that they can go and enjoy the park. Aug 21, 2009
IMG_Opera_1130.JPG
Aug 14, 2009
IMG_Opera_1129.JPG
Aug 14, 2009
IMG_Opera_1128.JPG
The brick side-walk is in, the trees are planted, the flowers are planted too but have yet to bloom.Aug 14, 2009
IMG_Opera_1127.JPG
Aug 14, 2009
IMG_Opera_1126.JPG
Three new trees are made from Woodland Scenics plastic tree armatures, polly fiber, and gree/grey finely ground foam from AMSI. I took the time to bend and shape the armatures to resemble those in my park photos.Aug 14, 2009
IMG_Opera_1125.JPG
Here is the printed brick-patterned sidewalk piece ready to install. It takes a little effort to cut and trim a complex pattern like this.Aug 14, 2009
IMG_Opera_1124.JPG
The Bank facade facade receives some final paint details too.Aug 14, 2009
IMG_Opera_1123.JPG
The Opera House facade receives some final paint details.Aug 14, 2009
IMG_Opera_1122.JPG
At this point the flower beds have been cleared with my Dremel tool and are ready for some new landscaping.Aug 14, 2009
IMG_Opera_1121.JPG
Aug 14, 2009
IMG_Opera_1120.JPG
The photo-etched brass stairways are really nice details. If you enlarge this photo you can see that the steps have the traction holes in them!Aug 14, 2009
IMG_Opera_1119.JPG
Aug 14, 2009
IMG_Opera_1118.JPG
The south east side restrooms have received additional paint and the two pay-phones have been made.The black box to the left of them contains an emergency defibrillator, so, if you need one, you know where at least one is located!Aug 14, 2009
IMG_Opera_1117.JPG
Aug 14, 2009
IMG_Opera_1116.JPG
Aug 14, 2009
IMG_Opera_1115.JPG
Illustrated here is the vast size of the entire Opera House block. The three "dots" along the crest of the main roof are large cast resin cyclone-type roof vents. My more recent aerial photos reveal that these are no longer present and they were most likely removed in 1965 when the theater for the Lincoln show was constructed and a full air conditioning system installed. However, I had these really nice N-scale details and just had to use them.Aug 14, 2009
IMG_Opera_1114.JPG
This is the north east corner. The stairways and railings used are photo-etched brass details.Aug 14, 2009
IMG_Opera_1113.JPG
The south east corner showing the stairway (external) that allows cast members to access the offices above the Bank Of Main Street. At this stage the drain-pipes and rain collectors have been installed. A bit of trivia here; the upper floors of the Opera House and bank (viewed from Town Square)were the only ones on Main Street built to full-size back in 1955.Aug 14, 2009
IMG_Opera_1112.JPG
The model work of the restroom area shows the detailing better after the basic tan color of the building has been applied.Aug 14, 2009
IMG_Opera_1111.JPG
Aug 14, 2009
IMG_Opera_1110.JPG
I also used my airbrush to paint the vast roof a light gray tone and also applied some light weathering. The rectangular 'box' on the lower left portion of the roof is most likely the remains from a massive early air conditioning unit. If you have E-Ticket magazine #43 (fall 2005), there is a photo on page 38 that shows the unit and a freshly tarred roof.Aug 14, 2009
IMG_Opera_1109.JPG
Using an airbrush I painted the building a light tan color.Aug 14, 2009
IMG_Opera_1108.JPG
This simple box structure is on the roof of the Opera House directly behind the beautiful architectural features.Aug 14, 2009
IMG_Opera_1107.JPG
A broader view of the south east corner showing how the two story facilities were added on to the rear of the main theater building.Aug 14, 2009
IMG_Opera_1106.JPG
South east corner.Aug 14, 2009
IMG_Opera_1105.JPG
This is a view of the south side facade with doors for the restrooms (men's to the left) and the center doorway which is an emergency exit from the Opera House lobby. Curiously, in years past the women's restroom was to the left.Aug 14, 2009
IMG_Opera_1104.JPG
Aug 14, 2009
IMG_Opera_1103.JPG
Aug 14, 2009
IMG_Opera_1102.JPG
The four main walls are assembled.Aug 07, 2009
IMG_Opera_1101.JPG
The main structure now containing the Lincoln theater was the first building completed on the Disneyland site and was used for the lumber and wood mill for the Park's constuction. My aerial photos show two large warehouse doors on the north side during the Park's early years. However, I doubt these remain today but, since I have no current photos, I went with the original design. The roof pitch is 10 degrees incase you're wondering.Aug 07, 2009
IMG_Opera_1100.JPG
Aug 07, 2009
IMG_Opera_1009.JPG
The styrene stip foundation alongside the south wall will house restrooms which are located here. Aug 07, 2009
IMG_Opera_1008.JPG
The two side walls have been cut from .060" styrene sheet. Doors will be installed before permanent assembly.Aug 07, 2009
IMG_Opera_1007.JPG
I've cut and used super glue to attach a piece of 3/4" thick Super-Board to the Opera House. I've used strips of styrene to outline and form the foundation for the Lincoln theater addition.Aug 07, 2009
IMG_Opera_1006.JPG
With the top of the roof removed the architectural 'ears' and ornate sculpture stand-out much better.Aug 07, 2009
IMG_Opera_1005.JPG
Aug 07, 2009
IMG_Opera_1004.JPG
Aug 07, 2009
IMG_Opera_1002.JPG
A few "Great Moments With Mr. Bandsaw" and the rear of the Opera House piece is gone.Aug 07, 2009
IMG_Opera_1003.JPG
Employing the bandsaw and a Dremel tool I removed a chunk of the roof top. This opens and improves the appearance of the ornate architectural features when viewed from the front.Aug 07, 2009
IMG_Opera_1001.JPG
In order to construct the very large structure which houses the "Great Moments With Mr. Lincoln" show I needed to remove the rear of the Opera House piece with my bandsaw.Aug 07, 2009
IMG_Opera_1000.JPG
The pencil line accross the roofs indicates a bit of surgery is about to take place.Aug 07, 2009
IMG_trainstation_(3).JPG
This aerial shot shows the geographic relationship to Town Square of the area I'm working on. Travelling by train to the left you'll be "entering the wilds of Adventureland." Aug 07, 2009
IMG_trainstation_(2).JPG
A variety of model landscape materials from Woodland Scenics and JTT Tree (the latter now available through MRC)was used to 'go green' along the RR right-of-way. Sharp eyes will spot the extension of the platform railing amongst all the greenery. Aug 07, 2009
IMG_trainstation.JPG
With all the work with the Tour Guide Gardens and nearby west-side souvenir stand complete, I was finally able to work on the landscape along the RR right-of-way to the left (west) of the train station. Just after leaving Main Street Station, there is a short (length) fence amongst the trees and shrubbery that blocks the view of the back stage area around City Hall. I photographed this fence on my last Park visit (July 25, 2009) so I could model it. Also, keen eyes will spot the thin grey form paralleling the RR tracks. This is actually individual wooden RR ties that line almost the entire Disneyland right-of-way nowadays. The ties help to contain the track ballast and hinder erosion of the earthen berm the track is situated upon. I cut the ties from bass-wood strips, colored them, and installed them with white glue prior to adding any lanscape materials along the berm.Aug 07, 2009
IMG_Cityhall_(3).JPG
A decent shot of the large tree. Anyone know the species? Aug 07, 2009
IMG_Cityhall_(2).JPG
This photo shows I've now installed the small globe lamp on the brick-work just to the right of the cast member door.Aug 07, 2009
IMG_Cityhall_(1).JPG
While this is pretty much the same view of the tour group (with much better lighting), I took this photo to show (although out of focus) the sign in the flower bed that instructs guests to "meet their tour guides here" has been added.Aug 07, 2009
car_1140.JPG
Jul 21, 2009
car_1139.JPG
Jul 21, 2009
car_1138.JPG
Jul 21, 2009
car_1137.JPG
Jul 21, 2009
car_1136.JPG
Jul 21, 2009
car_1135.JPG
Jul 21, 2009
car_1134.JPG
Notice the ground floors of these structures have no doors or windows because they merely serve as blinds to keep guests from seeing undesireable views of Big Thunder Mountain Railroad and other maintenance areas. The view of the bottom floors is prevented by a fence and several trees that separate Carnation Gardens from this area.Jul 21, 2009
car_1133.JPG
Jul 21, 2009
car_1132.JPG
These structures are almost ready to install, however, I need to get to the Park to photograph the backside which is the Rancho El Zocalo courtyard and has Spanish style architecture. Hey, any excuse to go to Disneyland...Jul 21, 2009
car_1131.JPG
The clusters of structures is now done. These buildings ease the transition from Fantasyland to Frontierland with their western style architecture. Additionaly, the palette of colors used towards Fantasyland (to the right in the photo)are brighter and contain shades of pinks and reds, while towards Frontierland they become more subtle with browns and tans. Jul 21, 2009
IMG_5864_1.JPG
A "Walk In Walt's Footsteps" tour is just getting underway. If you hurry you can join-up! This group of N-scale figurines are all from Preiser and custom painted. Though hard to see in the photo, I did place a riding crop in the guide's left hand.Jul 21, 2009
IMG_5863_1.JPG
Jul 21, 2009
IMG_5861_1.JPG
The lattice blind has too been installed at the top of the staicase behind City Hall. I actually think this blind serves more as a buffer to any harsh weather conditions to this otherwise rather exposed doorway.Jul 21, 2009
IMG_5862_1.JPG
This shows the easement between the Tour Guide courtyard to the left and what will be the landscaping alongside the Disneyland Railroad to the left (over the green wall). The wall is a cast resin N-scale cinder block pattern. You can see how the west side souvenir stand can be re-stocked without having to move product about on-stage.Jul 21, 2009
IMG_5860_1.JPG
The lattice fencing has been painted and installed. Jul 21, 2009
IMG_5859_1.JPG
Jul 21, 2009
IMG_5857_1.JPG
A brass photo-etched weathervane completes the Tour Guide structure. Notice that I had to pay attention to correctly orientate the N,S,E,W. "N" points toward Sleeping Beauty castle.Jul 21, 2009
IMG_5856_1.JPG
I scratch-built the souvenir stand, the back closes off this corner of the Tour Guide courtyard.Jul 21, 2009
IMG_5855_1.JPG
The tree on the left is new as the previous one I made was too large. This is made from a Woodland Scenics armature with their Poly-Fiber, and ground foam from JTT Tree.Jul 21, 2009
IMG_5854_1.JPG
I've placed the large tree temporarily so I can adjust its spread -I don't want it to conceal the view of the structures.Jul 21, 2009
IMG_5838_1.JPG
I've made sure to put a bunch of dead leaves on the rear roof too.Jul 21, 2009
IMG_5837_1.JPG
The brown stuff along the roof corners represents dead leaves. There are several large trees located along the railroad right-of-way from which leaves drop heavily on this side (south) of the Tour Guide center. (actually, the structure houses nothing more than a cast member break area). The model leaves were made from JTT crushed and finely ground leaves (what else?). Jul 21, 2009
IMG_5836_1.JPG
I've installed the Victorian trim along the roof peaks and painted the roof a blue-ish green. The roof was the dry-brushed with flat white to highlight the shingle detail.Jul 21, 2009
IMG_5834_1.JPG
This little structure is the west side of the souvenir stand that closes the corner of the Tour Guide courtyard. The door (this is the rear) leads from the interior of the stand into a access area and back stage.Jul 21, 2009
IMG_5832_1.JPG
This is the dip the road behind the Tour Guide area takes to allow vehicles -including the Disneyland Omnibusses- to cross underneath the tracks of the Disneyland Railroad. It is made from a piece of 1/8" extruded PVC board.Jul 21, 2009
IMG_5831_1.JPG
The white styrene strips close the gap between the City Hall piece and the surrounding road.Jul 21, 2009
IMG_5830_1.JPG
A view from the front illustrates how the patio was set-back from the front of Town Square so us Park-guests can't see who's up there.Jul 21, 2009
IMG_5829_1.JPG
Jul 21, 2009
IMG_5828_1.JPG
Here the pieces have been temporarily installed so you can see their placement.Jul 21, 2009
IMG_5827_1.JPG
Jul 21, 2009
IMG_5826_1.JPG
Here the piece is upside down to show the framing for the lattice roof shade. All I need to do now is paint them.Jul 21, 2009
IMG_5825_1.JPG
The lattice fence construction for the upper patio is complete. The smaller piece is actually a blind that will be installed on the rear of City Hall at the top of the sdded staircase. Jul 21, 2009
IMG_5824_1.JPG
Here's the tree with double the number of branches.Jul 21, 2009
IMG_5823_1.JPG
Here the upper patio gets its indoor-outdoor 'carpet.' I've masked of the patio with red vinyl masking tape and painted the area a flat medium blue.Jul 21, 2009
IMG_5822_1.JPG
The species of the large tree in front of the restroom area (between City Hall and the Firehouse) is very distinctive with a large number of brances. Sorry, I don't know what type of tree it is! The model tree I had intended to use ( a 2 1/2" umbrella pine from JTT Tree)didn't have enough branches to capture the appearance. So, I stripped the foliage off both the first tree (gray branches in photo) and an additional one (brown). I spread the branches of the brown one, cut the trunck of the gray one, and sliced the two together using super glue. This gave me a good representation of this beautiful tree. Jul 21, 2009
IMG_5820_1.JPG
I've begun to construct the lattice fencing that will go around the perimeter of the roof-top patio. The framing is of various styrene strips while the lattice is photo-etched brass.Jul 21, 2009
IMG_5819_1.JPG
Jul 21, 2009
IMG_5818_1.JPG
Jul 21, 2009
IMG_5817_1.JPG
Oh how I wish someday to be able to ascend this staiway at the Park and enter into Walt's apartment! That'd be an experience for sure.Jul 21, 2009
IMG_5816_1.JPG
Jul 21, 2009
IMG_5815_1.JPG
This view shows the patio area and the door from Walt's apartment allowing access to it.Jul 21, 2009
IMG_5814_1.JPG
Additional doors and staircases added.Jul 21, 2009
IMG_5813_1.JPG
Jul 21, 2009
IMG_5812_1.JPG
The next couple of photos show that I decided (yes, at this late point) to re-paint the entire brickwork and trim of the structures. The bricks are a deeper red and lots of additional cream and golden-tone trim has been added. The AGI-District model represents the Park as it appeared on the 50th Anniversary.Jul 21, 2009
IMG_5810_1.JPG
A lot of work was done to the "back stage" side of the City Hall piece. Here, the stairs leading up into Walt's apartment have been installed and, of course, a door at the top of the stairs too. Also visable is the fancy lattice fence running across the roof from the Firehouse to City Hall. This area is the patio where Walt would entertain guests and is accessible through a door located in the Firehouse tower. Other details visable here include some piping (from the men' and women's restrooms) and conduits, a drain pipe, while the red box is for a fire hoseJul 21, 2009
car_1130.JPG
Can you recognize this structure now?Jul 11, 2009
car_1129.JPG
Jul 11, 2009
car_1128.JPG
Through the main aperture on the front is the passageway that guests can use to enter Frontierland from the Plaza Gardens. The exit will place them directly at the entrance for the Rancho El Zocalo restaurant. Restrooms are also located towards the exit to Frontierland. The openings to either side of the main passageway are for cast members only and lead to maintenance facilities (to the right) and the back stage area (to the left) for the Plaza Garden's performers.Jul 11, 2009
car_1127.JPG
The 'wings' have been built up and the facades of some of the other structures begun. At Disneyland, this row of 'fronts' serves to block the view of the maintenance and control area for Big Thunder Mountain Railroad. The 'flats' employ a good dosage of "forced perspective" and lead guests to believe there is a substantial western style town just beyond the fence at the Plaza Gardens.Jul 11, 2009
car_1126.JPG
These are the left and right 'wings' that will attach to the main facade. The door openings were cut out of the clapboard sides and the doors were fabricated and then installed.Jul 11, 2009
car_1125.JPG
Okay. It's beginning to look like something now.Jul 11, 2009
car_1124.JPG
Jul 11, 2009
car_1123.JPG
Jul 11, 2009
car_1122.JPG
This piece of clapboard siding styrene is the beginning of the structure that leads into Frontierland from the Plaza Gardens. You can follow along as I fabricate this model in the next few photos. This piece is the front facade.Jul 11, 2009
car_1121.JPG
Another view of the area looking west. The repainted and 'toned-down' colors of the canopy a very evident.Jan 19, 2009
car_1120.JPG
Aerial view of the Carnation Plaza Gardens showing the layout of the area defined by the landscaping.Jan 19, 2009
car_1119.JPG
View of the stone walls looking south toward the Plaza Hub.Jan 19, 2009
car_1118.JPG
View of the north wall of the gardens. Note the restroom cut into the landscape.Jan 19, 2009
car_1117.JPG
The "stone" wall along the Frontierland side is complete. Note the hand-painted matching stone pattern on top. The small flower bed on the canopy side of the walkway has been defined with a curb made from .040" 1/4-round styrene strip.Jan 19, 2009
car_1116.JPG
Aerial viewJan 19, 2009
car_1115.JPG
Here the restroom has been installed. It is cut into the landscape mound. Also. the end pillars of the "stone" walls have been installed. These are made from .125" square styrene tubing and, along with the walls, are covered with flagstone patterned paper. The tops of all the walls around the gardens were hand painted to match the pattern of the paper since it is very difficult get the paper to lie flat along a horizontal plane.Jan 19, 2009
car_1114.JPG
Jan 09, 2009
car_1113.JPG
This is the Plaza Gardens restroom I made from N-scale styrene clapboard siding and other styrene pieces.Jan 09, 2009
car_1111.JPG
Here the white curvy object is the 'stone' wall leading from the main bridge into the "gardens" and along the Frontireland side of the PLaza canopy. It is made of .060"(W) X .125"(H)styrene strip and secured with CA glue. You can also see the temporary dam I made to prevent the "water" from flowing into the Frontierland pools.Jan 09, 2009
car_1112.JPG
Jan 09, 2009
car_1110.JPG
Here the canopy has been masked for repainting. The colors on the real one -especially the red- are much duller. I believe this is because the Disney Art Directors want to blend the canopy into the surrounding landscape so it doesn't detract from the Frontierland entrance stockade in proximity to the Carnation Gardens.Dec 14, 2008
ts_1000.JPG
Nov 27, 2008
IMG_5772_9_6.JPG
This photo reveals a bit of a story. You'll likely notice all the RR track has been removed! There were some more details I needed to add to the station and I had no other option but to remove the track-work in order to lift the station out. I'm happy to report (as you'll see in subsequent photos) the track has already been replaced. Our station is now permanently installed on our layout.Nov 27, 2008
car_1109.JPG
Here's the photo copy installed. It really adds a lot of detail to this piece.Oct 26, 2008
car_1108.JPG
To add detail to the back of the stage area, once again I employed the photo trick. During our last visit I took a shot of the back of the stage and then reduced the photo until the area I needed was the correct size. This photo shows my original photo and the reduced copy. I cut the area out from my copy with a hobby knife with a new blade and glued the piece in place with Woodland Scenics Hob-E-Tac adhesive.Oct 26, 2008
car_1107.JPG
This is a close-up of the modified concrete base.Oct 15, 2008
car_1106.JPG
Oct 15, 2008
car_1105.JPG
The 'concrete' base of the structure is straight-lined between the canopy support posts and follows the same lines as the canopy. The next few photos shows the steps I took to model this. A razor saw was used to cut the resin base. Note that I only cut about 3/64" deep and not all the way through the base.Oct 15, 2008
car_1104.JPG
The railing surrounding the stage area is cut and sections removed to allow access for the guests.Oct 15, 2008
car_1103.JPG
Here's the stage structure situated accross the stream from the Central Plaza.Oct 15, 2008
car_1102.JPG
Shims made from bass wood are used to bring the structure to the correct elevation on our layout.Oct 15, 2008
car_1101.JPG
Sep 28, 2008
car_1100.JPG
Sep 28, 2008
car_1099.JPG
Sep 28, 2008
car_1098.JPG
Carefully cutting the canopy free from the original landscaping with a band saw.Sep 28, 2008
car_1097.JPG
The time had arrived to address the fitting of the Carnation Gardens piece into our model. Because our larger model layout allows for the "de-compressing" of the Olszewski arrangement of the pieces, we can construct all the landscaping areas to fill-out the space created once the piece has been located following our park plan. This meant reducing the Carnation Gardens piece to, well, just the stage canopy and discarding the "gardens." A band-saw made this task easy.Sep 28, 2008
IMG_5590_17.JPG
Aug 12, 2008
IMG_5590_16.JPG
Aug 12, 2008
IMG_5590_14.JPG
Aug 12, 2008
IMG_5590_15.JPG
Aug 12, 2008
IMG_5772_9_5.JPG
Here are the three different floral Mickey pieces. There is another one I want to construct involving some electronics and lighting effects but, for now, we'll move on to finishing some other work to get our Main Street area closer to completion. This fun little project was all Tahnee's idea -and a very good one! It is now very easy to change-out the pieces to represent the different seasons -and the 50th celebration- in just a couple of seconds.Aug 04, 2008
IMG_5772_9_4.JPG
Aug 04, 2008
IMG_5772_9_3.JPG
Aug 04, 2008
IMG_5772_9_2.JPG
Aug 04, 2008
IMG_5772_9_1.JPG
Here is the completed Fall piece. I'm happier with the contrast between the vines and the lawn as the deatail stands out better.Aug 04, 2008
IMG_5772_9.JPG
I mixed up some different shades of orange paint and randomely re-colored some of the mini-pumpkins to add more variety and detail to them. At this point I wasn't satisfied with the shade of green in the lawn area as there didn't seem to be a desirable contrast with the vines. I carefully scraped out the existing lawn and replaced it with a lighter shade.Aug 04, 2008
IMG_5772_8.JPG
Aug 04, 2008
IMG_5772_7.JPG
The face details of the Jack-O-Lanterns has been added by applying blue paint. Also, the red flowers have grown in the mask area on Mickey.Aug 04, 2008
IMG_5772_6.JPG
The ground cover in the lawn area has now been added.Aug 04, 2008
IMG_5772_5.JPG
The base piece has been painted with flat enamel green paint and the 'vines' have been covered with dark green ground cover. The Jack-O-Lanterns have been covered with a green ground cover first and then orange over the top.Aug 04, 2008
IMG_5772_4.JPG
Again referring to our Park photos taken during the Fall season, I sketched the decorative floral pattern onto thin card stock. I only had to sketch one side as I would be able to flip the pattern over and trace it for the opposite side. The pattern was cut out with a hobby knife and then glued to the base piece.Aug 04, 2008
IMG_5772_3.JPG
Here's my first attempt at installing the pumpkins. I discovered that the 'oranges' are colored with a water-soluble dye and my water-based "Scenic Cement" made a nice orange gel with them. Not good. I removed the mess shown here and used CA (super glue) instead.Jul 27, 2008
IMG_5772_2.JPG
Disneyland cleverly uses mini pumpkins in the Fall floral Mickey pattern. This presented a bit of a challenge to me to replicate in N scale. Finally, I remembered that the good folks at Woodland Scenics make a "Fruit" pack of apples and oranges for trees used on H:O scale (1:87) models. I thought the H:O oranges would make pretty good N scale mini pumpkins.Jul 27, 2008
IMG_5772_1.JPG
Jul 27, 2008
IMG_5772.JPG
Now, on to our Fall floral Mickey.Jul 27, 2008
IMG_5771_3.JPG
Greetings from Disneyland, July 17, 2005. If you've noticed there are no train tracks (again) well, there's another story to be told as this Main Street Station project moves along. More on that later.Jul 27, 2008
IMG_5771_2.JPG
Jul 27, 2008
IMG_5771_1.JPG
Happy Birthday Disneyland!Jul 27, 2008
IMG_5771.JPG
Jul 27, 2008
IMG_5770_1.JPG
Mickey's base was timmed away and a mounting rod of .040" piano wire fitted. This was done by drilling a .040" hole and glueing the rod in place.Jul 27, 2008
IMG_5768_1.JPG
A tail was added made from .010" brass rod.Jul 27, 2008
IMG_5769_1.JPG
Jul 27, 2008
IMG_5767_1.JPG
The 'arms' were bent and then trimmed to length. His thumbs were formed by bending .010" brass rod around his arms the then super gluered in place and trimmed. His hands were actually formed by repeated application of super glue and a little carving.Jul 27, 2008
IMG_5766_1.JPG
.020" brass rod is inserted through the torso to form his new arms.Jul 27, 2008
IMG_5765_1.JPG
It's time for Mickey to prepare for his role. Hey Sweety, where's our box of Olszewski's "Fab Five" character pack? (we bought an extra set for this and other projects) Mickey's arms were removed with small flush-cut wire cutters and the torso filed smooth. Next, I drill a hole (sorry Mickey) in preparation of adding new arms with a .020" drill and a pin vise.Jul 27, 2008
IMG_5763_1.JPG
...with a little watering, the gold flowers surrounding the "50th" pattern have grown too.Jul 27, 2008
IMG_5762_1.JPG
First the ribbon flowers are grown, then...Jul 27, 2008
IMG_5759_1.JPG
The 'lawn' is in place and the base for the gold flowers too.Jul 27, 2008
IMG_5758_1.JPG
Consulting our park photos revealed the rest of the 50th pattern for the landscape area. The gold 'ribbon' was sketched on card stock, cut out and glued in place.Jul 27, 2008
IMG_5757_1.JPG
The numbers were painted yellow and then yellow colored ground foam was applied. Next, the blue flowers were applied.Jul 27, 2008
IMG_5755_1_1.JPG
I cut the numbers out and carved them a bit. The font had to be more bold than the originals. The numbers were then glued to the pattern.Jul 27, 2008
IMG_5754_1.JPG
I needed to make the "50" numbers so I got the font right off my gold 50th Anniversry day Mickey ears (don't worry, I made a fascimile on a copy machine). I cut the numbers out and traced them onto a scrap of .060" styene plastic.Jul 27, 2008
IMG_5753_1.JPG
Light maroon foam (here it looks red) around the perimeter on top of the green base.Jul 27, 2008
IMG_5752_1.JPG
Green colored foam appplied to form the base of the flowers.Jul 27, 2008
IMG_5751_1.JPG
Flat green and blue paint applied.Jul 27, 2008
IMG_5749_1.JPG
For the next pattern, Disneyland's 50th Celebration, the Mickey face profile has to be altered somewhat. I'm doing this with .020" X .040" plastic strips.Jul 27, 2008
IMG_5750_1.JPG
"Steps" to elevate the different colored flowers in the pattern are made from card stock.Jul 27, 2008
IMG_5748_1.JPG
The magnet has been installed and secured with a drop of super glue.Jul 27, 2008
IMG_5747_1.JPG
Jul 27, 2008
IMG_5746_1.JPG
I'm beginning another pattern. Any guesses which one it'll be? I forgot to show this step earlier: I drill a 3/16" hole in order to install round -and very strong- neodyum magnets. These make it easy to remove the pieces when we want to change them out.Jul 27, 2008
IMG_5745_6.JPG
Here's our new favorite "leader of the band" greeting our guests as they pour through the turnstiles. This is our spring/summer pattern.Jul 27, 2008
IMG_5745_5.JPG
I found the purple color for Mickey to be a bit on the light side so I darkened the color by carefully painting over the area with a deeper hue. It looks better to me now.Jul 27, 2008
IMG_5745_4.JPG
Now for the orange flowers.Jul 27, 2008
IMG_5745_3.JPG
The green 'lawn' area has been applied and here I've begun the application of the red flowers. Note also that the white (and a little red) has been applied to Mickey to finish the face pattern.Jul 27, 2008
IMG_5745_2.JPG
The green texture for the floral pattern is complete.Jul 27, 2008
IMG_5745_1.JPG
Un-diluted white glue is painted over the pattern and then the green texture is sprinkled on. I lightly press the material into the glue to ensure good, dense adhesion. After the glue sets I gently brush off the excess with a make-up brush. Jul 27, 2008
IMG_5744_1_1.JPG
The pattern was cut from the card stock with a hobby knife and then traced onto the resin lanscaping piece. Here I've begun applying the green texture to form the base for the flowers which will be applied on top of it. Please excuse the poor quality of these photos as I took them at night under my desk lamp.Jul 27, 2008
IMG_5743.JPG
Using my park photos as a guide, I carefully sketched the pattern for the other decorative flowers surrounding Mickey. This was done on light card stock.Jul 27, 2008
IMG_5745.JPG
Jul 27, 2008
IMG_5742_1_1.JPG
Close-up of the application of the purple 'flowers.'Jul 27, 2008
IMG_5740_1_1.JPG
Once the mold had been made of the new Mickey landscape filler piece, several castings were made of quick-set resin. Here is one that has been painted with light brown flat latex paint. It is necessary to paint the piece before applying any landscape materials in order for them to adhere to it using water-based glues. I began adding the 'flowers' to the Mickey face by painting the areas with un-diluted white glue and sprinkling on purple colored finely ground foam.Jul 27, 2008
IMG_0172_1.JPG
May 02, 2008
IMG_0298.jpg
May 02, 2008
IMG_0301.jpg
May 02, 2008
IMG_5568_13.JPG
Mar 23, 2008
IMG_5590_13.JPG
Mar 23, 2008
IMG_5590_12.JPG
Mar 23, 2008
IMG_5590_11.JPG
Mar 23, 2008
IMG_5695_1.JPG
Mar 21, 2008
IMG_5694_1.JPG
The original railing around the front of the floral Mickey was removed and replaced with some photo-etched spearhead fencing. This was more difficult than usual because I had to shorten the fence a couple of scale feet.Mar 21, 2008
IMG_5693_1.JPG
The fencing on the righthand side of the platform installed. This is photo-etched brass.Mar 21, 2008
IMG_5684_1_1.JPG
Mar 21, 2008
IMG_5682_1_1.JPG
Mar 21, 2008
IMG_5701_1_1.JPG
Mar 20, 2008
IMG_5700_1_1.JPG
Mar 20, 2008
IMG_5699_1_1.JPG
Mar 20, 2008
IMG_5698_1_1.JPG
This view highlights the baggage cart with the luggage installed.Mar 20, 2008
IMG_5697_1_1.JPG
Mar 20, 2008
IMG_5696_1_1.JPG
Mar 20, 2008
IMG_5695_1_1.JPG
It was time to have some more fun and add some figures to the Town Square side of our station. Note the photographer snapping a great shot from this vantage point. He's looking directly down the center of Main Street with Sleeping Beauty castle in the distance beyond the Plaza. At this point, the figure count is up to 48 on this piece! I believe the final count will be around 60 when I'm finished. Also, I replaced the fencing on this side, too, with the same material as used on the front side of the loading platform. Mar 20, 2008
IMG_5694_1_1.JPG
Mar 20, 2008
IMG_5735.JPG
Mar 20, 2008
IMG_5692_1_1.JPG
I like this conductor figure because he can be viewed as either greeting an arriving train or waving goodbye to guests on a departing one.Mar 20, 2008
IMG_5691_1_1.JPG
Mar 20, 2008
IMG_5690_1_1.JPG
Mar 20, 2008
IMG_5689_1_1.JPG
Mar 20, 2008
IMG_5688_1_1.JPG
Mar 20, 2008
IMG_5686_1_1.JPG
Mar 20, 2008
IMG_5680_3_1.JPG
This overhead shows the completed landscaping work. Mar 11, 2008
IMG_5678_5_1.JPG
If you look closely you can see the additional guests added to the cues compared with the earlier photos.Mar 11, 2008
IMG_5677_6_1.JPG
Mar 11, 2008
IMG_5675_1_1.JPG
I replaced the original handrails in the exits. These were made from .015" and .019" brass rod. I also used thin decal striping to make the white and yellow caution lines on the edges of the steps. Tahnee selects the colors for all the flower beds on our Main Street model and we've gone with blue and white in the outside beds and red and white in the center ones. The planting areas were painted a earth color before the 'flowers' were added.Mar 11, 2008
IMG_5738.JPG
I made a copy of Mickey reduced to about the right size to get an idea of how it'll look.Mar 11, 2008
IMG_5739.JPG
The actual floral Mickey face is very different than the artwork, so, I traced the original copy and then began to alter the lines to replicate the 'floral' pattern more accurately. I only had to draw half of the face because it is a simple matter to just flip the art over to trace both halves to form a complete face onto the landscaping piece. I have to wait for some silicone rubber to arrive so I can make the mold. Meanwhile, I'll get back to working on the other details.Mar 11, 2008
IMG_5734.JPG
You're probably wondering what the heck we're up to now. Tahnee had a great idea to make the floral Mickey design removable so it could be changed-out to reflect different seasons, just like at the park. It was a great idea but, it took quite a bit of work to actually remove the original design as the resin is very thick in this area. Here plastic strips have been glued in to keep the new Mickey filler piece at the correct level.Mar 11, 2008
IMG_5737.JPG
Here is the new filler piece for the floral Mickey area. It was made of 1/8" extruded ABS and some Bondo work was needed to contour the area to fit properly. After Mickey's face has been outlined with plastic strips a mold will be made and duplicates cast. The castings will be decorated with different colored 'flowers' and patterns replicating Disneyland's seasonal designs.Mar 11, 2008
IMG_5736.JPG
Mar 08, 2008
IMG_5647_10_1.JPG
Mar 08, 2008
IMG_5646_9_1.JPG
Here are views of the 'open' platform exits. They're still blocked somewhat by the tree planters which serve to hide the wiring for the L.E.D. lighting. Note that the fence to prevent guests from falling off the platform above the righthand entrance tunnel has yet to be added.Mar 08, 2008
IMG_5645_8_1.JPG
After some time now, I wasn't happy with the appearance of the original fencing on the platform -it was too low. Also, I realized that the fencing configuration was wrong and blocked the exits! So, it was replaced with some new photo-etched fencing. The re-configuration around the exits now necessitated relocation of some figures waiting in the cues. I also took the opportunity while the fencing was removed to add some additional figures too. The engineers were moved a little towards the depot as well. I'm happy with the new fencing and at least the guests can now exit the platforms! Mar 08, 2008
IMG_5644_7_1.JPG
Another conductor has been added. I like the waving pose of this one from a Woodland Scenics set.Mar 08, 2008
IMG_5641_4_1.JPG
All the "flower" beds have now been cleared. The next step is to paint these areas a dirt brown color.Mar 08, 2008
IMG_5640_3_1.JPG
Mar 08, 2008
IMG_5639_2_1.JPG
Mar 08, 2008
IMG_5638_1_1.JPG
In order to replce the original landscaping the existing "flower" beds were carefully ground away with a Dremel tool.Mar 08, 2008
IMG_5589_9_1.JPG
Believe it or not, a photo-etched weather vane with a rooster is available and this was perfect to crown our Plaza Inn. Compare it with the photo of the real one in the "Disneyland's Plaza Inn" file. It's almost an exact copy!Feb 10, 2008
IMG_5587_7_1.JPG
This is a little scene I made at the north side exit from the dining patio. The family is attempting to leave but the little boy is holding onto the gate. He had so much fun at his "Disneyland Birthday" at the Plaza Inn that he's reluctant to leave and head into Tomorrowland for his first ride on the Astro Orbitor!Feb 10, 2008
IMG_5581_1_1.JPG
This view shows the landscaping on the south side of East Plaza Street. The flower pot was made from styrene tubing. The ground cover here is JTT Tree Fine Ground Leaves which simulates the wood chips in this area nicely. I detail painted the laticework to match the others on this piece.Feb 10, 2008
IMG_5575_6_1.JPG
Flowers and shrubs have been planted on the north side.Feb 07, 2008
IMG_5574_5_1.JPG
Feb 07, 2008
IMG_5571_2_1.JPG
An overhead view of East Plaza Street after painting.Feb 07, 2008
IMG_5570_1_1.JPG
This view is a closeup of the street painting technique I've developed after many years. The street was airbrushed using Floquil Railroad Colors to achieve a realistic appearance. This is how it's done: for Main Street, after a primer coat has been applied, I chose to paint the base color a medium grey 50/50 mix of Reefer White and Weathered Black. Next, four colors were applied using a very fine stipple adjustment. 1st) Concrete, 2nd) Reefer White, 3rd) Grimy Black, 4th) Antique White. By layering these colors the effect replicates the individual stones that make up an asphalt roadway.Feb 07, 2008
IMG_5565_9_1.JPG
The original hole for a tree has been left because it's in exactly the right spot.Feb 03, 2008
IMG_5564_8_1.JPG
The photo-etched railing has been added and the green ground cover has been sprinkled in.Feb 03, 2008
IMG_5568_12_1.JPG
Here is a size comparison between the original flags on the left compared with my reduced flagsFeb 03, 2008
IMG_5561_5_1.JPG
Feb 03, 2008
IMG_5560_4_1.JPG
Feb 03, 2008
IMG_5556_8_1_1.JPG
Here's another (better) look at the pedestal benches. Also, we have temporarilly installed the 'right' trees now and they look more correct than the deciduous trees seen in previous photos. I have to detail them a bit and then they'll be 'planted' for good. The two kids are a bit anxious to venture into more exciting areas of the park as soon as dad returns with more cash from the Disneyland Bank located just accross the street. At this point, the popcorn cart and drinking fountains are about all that's left model to complete our Town Square.Feb 01, 2008
IMG_5553_6_1_1.JPG
The flags were simple to make: I cut the Olszewski flags from the pole and reduced them 25% on a color copy machine. Both sides of the flags had to be copied. The sides were then glued sandwiching the thread lanyard line. I was careful to glue both flags to the same line. All that was left to do was to add a bit of curl to them. "Long may yee wave!" Well, at least until 4:30pm :>)Feb 01, 2008
IMG_5551_5_1_1.JPG
THe base of the pole was formed from various styrene tubing and worked on my Dremel tool like a lathe operation. The very bottom is octagonal shaped as is the 'concrete' foundation. I made a cleat from brass stock and made sure to tie-off the lanyard lines -we can't allow Old Glory to hit the ground!Feb 01, 2008
IMG_5550_4_1_1.JPG
The flagpole was made from a piece of .045" piano wire. The wire was hand filed to a taper. This was a tedious task but was the only way I could think of to create this shape in an almost indestructible medium. When I was satisfied with the shape, I chucked the wire into my Dremel tool and reduced the wire down further to form the thin support for the gold globe on top. The globe was formed from a small length of styrene rod. Lanyard lines were made from thin thread.Feb 01, 2008
IMG_5548_3_1_1.JPG
Feb 01, 2008
IMG_5546_2_1_1.JPG
Feb 01, 2008
IMG_5545_1_1_1.JPG
Note the flower bed is roughly the same profile as the overall Town Square piece.Feb 01, 2008
IMG_5558_2_1.JPG
Here I'm working on the north side flower bed. The original landscaping was carefully ground away leaving the original curb seen here. Note that I had to add a small addition to the base to allow the lanscaping to be extended outward.Feb 01, 2008
IMG_5559_3_1.JPG
Using .030" X .040" styrene strips I've continued the curbing to enclose and define the landscaping area.Feb 01, 2008
IMG_5540_2_1_1.JPG
Instead of modifying the original entrance sign, I decided to construct our own. I began by folding photo-etched brass diamond pattern screen aound a triangular profile plastic strip. Then .010" X .020" styrene strips were glued to all three corners of each column. Triangle .015" styrene pieces (caps) were then glued to the top and bottom. Holes were then drilled through the caps to allow .020" piano wire "lamp posts" to be run through forming both mounting pegs on the bottom and lamp posts on the top of either column. Flat brass bar (.015" X .040" ) was then carefully bent to form the supports for the "Plaza Inn" sign that connect both columns together. Another short length of .020" piano wire forms the third lamp post in the center. Small plastic spheres from a doll house gumball machine were used to make the white lamp globes. Also, some photo-etched patterns were glued on to add some Victorian charm. More of this will be added before the piece is finished. Currently, I have no good photo of the "Plaza Inn" sign from which to make our miniature version so were done until after our next visit to the park.Feb 01, 2008
IMG_5537_1_1_1.JPG
The south side exit railing has been added. These were made from photo-ethched brass fencing. The gate was installed slightly open.Feb 01, 2008
IMG_5531_12_1.JPG
Jan 29, 2008
IMG_5530_11_1.JPG
The lanscape island here in the forground is removable -just like with the Olszewski piece- so the Christmas tree can be set up.Jan 29, 2008
IMG_5529_10_1.JPG
I also used Olszewski's beautifully sculpted pedestal benches. They were ground down with a Dremel tool and a sanding drum to thin down the base and repainted. I also added the highly manicured miniature trees to them. These were made from piano wire, Balsa wood, paint and ground foam. The wood was glued to the wire and then shaped. I then painted them olive green before brushing on white glue and coating them with JTT Tree finely ground foam. Holes were drilled into the tops of the flower baskets and the trees were inserted and secured with a bit of super glue.Jan 29, 2008
IMG_5528_9_1.JPG
I made the flagpole base from styrene tubing and turned them in my Dremel tool in a manner like a lathe operation to shape them. Notice the cleat on the pole with the flag lanyard lines tied off.Jan 29, 2008
IMG_5527_8_1.JPG
I used the Olszewski artillery pieces. I re-painted them and installed them on my pedestals.Jan 29, 2008
IMG_5522_4_1.JPG
Jan 29, 2008
IMG_5521_3_1.JPG
Jan 29, 2008
IMG_5519_2_1.JPG
Here's a view of some planted shrubs (whoopie :>) It was a bit tricky to drill the holes to install them in the narrow flower beds between the railings! The scratch-built photo backdrop has been installed too.Jan 29, 2008
IMG_5515_1_1.JPG
I had forgotten to stipple paint the street curbs (doh!) earlier before all the brickwork and landscaping was added. So, here I've masked the curbs to be painted. This was necessary because I use an airbrush to apply the stippling to the curbs.Jan 29, 2008
IMG_5496_2_1.JPG
The shrubs are ready for planting. Notice the two types.Jan 18, 2008
IMG_5495_1_1.JPG
New shrubs for the planters surrounding the dining patios are made. I made two kinds: one with just straight piano wire trunks and others with more detailed trunks. The detailed trunk type was made from JTT Tree branches. The body of the shrubs were shaped from 1/16" thick Balsa wood and sanded to shape. The armatures were painted green before being brushed with white glue and coated with finely ground foam. Finally, the trunks were painted light grey. The detailed trunk shrubs will be planted in more visable areas like around the entrance to the Plaza Inn.Jan 18, 2008
IMG_5494_6_1.JPG
All done now.Jan 14, 2008
IMG_5491_3_1.JPG
The canopy on the reservation cart was lowered about 1/16". The entire cart was then repainted, including additional stripes.Jan 14, 2008
IMG_5487_1_1.JPG
Here is the new completed backdrop, minus the plants, curtains and signage.Jan 14, 2008
IMG_5486_2_1.JPG
Jan 08, 2008
IMG_5485_1_1.JPG
I fabricated a new birthday photo backdrop from styrene and brass mesh. The four planter boxes are shown too. The original is shown to the right.Jan 08, 2008
IMG_5466_11_1.JPG
The main overhead "Plaza Inn" sign needs to be installed. I'm going to do a few modifications to it before it's ready. Also, the birthday reservation cart has undergone some modification and a new paint job carried out. It should be re-appearing soon -stand by.Jan 03, 2008
IMG_5464_9_1.JPG
The two 'boulders' in the island to the right are actually at the park. East Center Street has been primered. Final painting will happen when all of the streetwork has been completed.Jan 03, 2008
IMG_5463_8_1.JPG
The new landscape islands have had their railings installed and fresh 'grass' has grown in. Trees and additional details are on the way. The sidewalk bricks need to be finished. The non-brick pathways have been painted a base matte earth tone and two colors (weathered black and white) have been 'stipple' painted (misted) over to re-create the park's hue. The four blue umbrellas have been modified the same way as those on the patio and re-installed. Looks like I need more of these too!Jan 03, 2008
IMG_5462_7_1.JPG
Here's a view of the modified "Happiest Birthday" banners. Again, they were shortened and 'crosses' of brass rods were added. Note the detail painting over the brass rods.Jan 03, 2008
IMG_5461_6_1.JPG
A shot of the flower beds. We need some tables and chairs!Jan 03, 2008
IMG_5460_5_1.JPG
Some "exit" railing at the base of the steps is yet to be added.Jan 03, 2008
IMG_5459_4_1.JPG
View of the south side with the sidewalks installed. Jan 03, 2008
IMG_5456_1_1.JPG
Okay, it's been awhile since we took some photos and a LOT of work has been completed! First, the grey slate paving stones have been added. These were made by scribing 1/8" squares onto .005" thick styrene sheet. The sheet was then cut into the roughly 1/2" squares to fill between the brick outlines. This was a tedious task. Bases for the yet to be added 11 lamp posts were fabricated from styrene and installed around the dining patio retaining walls. Next, the entry awning received 10 new supporting poles made from .019" brass rod and has been re-installed. The poles are roughly 3/16" shorter than the originals. "Iron" railing was then installed around the retaining walls and flower beds in front of them. The 14 pink and yellow "Happiest Birthday" banners were shortened about 1/4" and "crosses" were added made from .012" and .019" brass rods. New locating holes were drilled and the banners re-installed according to my photos. Next, the Plaza Inn's landscaping was 'planted' with various colored finely ground foams from JTT Tree and Woodland scenics. The two "big" trees are modified 2 1/2" and 1 1/2" "Ash" trees from JTT Tree. Other trees are yet to be installed.Jan 03, 2008
IMG_5458_3_1.JPG
Photo of the north dining patio. The umbrellas have been modified with .012 brass rod poles and new locating holes have been drilled. The poles have yet to be painted. Looks like I'll have to order about 10 more from the Olszewski Studios! The pedestal bases for the future lamp posts can be seen along with the new railings.Jan 03, 2008
IMG_5298_9_1.JPG
Dec 23, 2007
IMG_5296_7_1.JPG
Dec 23, 2007
IMG_5295_6_1.JPG
Dec 23, 2007
IMG_5293_4_1.JPG
Dec 23, 2007
IMG_5292_3_1.JPG
Dec 23, 2007
IMG_5290_1_1.JPG
Dec 23, 2007
IMG_5166_9_1.JPG
Dec 23, 2007
IMG_5162_13_1.JPG
Dec 23, 2007
IMG_5144_22_1.JPG
Dec 23, 2007
IMG_5143_21_1.JPG
Dec 23, 2007
IMG_5141_19_1.JPG
Dec 23, 2007
IMG_5139_17_1.JPG
Dec 23, 2007
IMG_5138_16_1.JPG
Dec 23, 2007
IMG_5137_15_1.JPG
Dec 23, 2007
IMG_5136_14_1.JPG
Dec 23, 2007
IMG_5135_40_1.JPG
Dec 23, 2007
IMG_5134_12_1.JPG
Dec 23, 2007
IMG_5131_9_1.JPG
Dec 23, 2007
IMG_5130_8_1.JPG
Dec 23, 2007
IMG_5129_7_1.JPG
Dec 23, 2007
IMG_5127_5_1.JPG
Dec 23, 2007
IMG_5126_49_1.JPG
Dec 23, 2007
IMG_4964_1_1.JPG
November 2007Snow on Main Street.Dec 16, 2007
IMG_4914_1_1.JPG
November 2007Dec 16, 2007
IMG_4909_2_1.JPG
November 2007Dec 16, 2007
IMG_4911_1_1.JPG
November 2007Dec 16, 2007
IMG_4883_2_1.JPG
November 2007Dec 16, 2007
IMG_4882_1_1.JPG
November 2007Dec 16, 2007
IMG_4879_1_1.JPG
November, 2007Dec 14, 2007
IMG_4878_3_1.JPG
November, 2007Dec 14, 2007
IMG_4875_2_1.JPG
November, 2007While fillin' my new pipe, I saw a short little man come on in to the Market House, and his wonderful brogue identified him as one of our many guests from Ireland. He walked over to the counter and hungrily eyed a delicious-lookin' piece of artificial cheese. He asked the storekeeper how the cheese was sold. She replied, "It's wax, sir." He quizzically looked at her for a moment, then replied, "Well, I'll take a couple of whacks!" (Vacationland, winter/spring 1964)Dec 14, 2007
IMG_4889_4_1.JPG
November, 2007Dec 14, 2007
IMG_4887_1_1.JPG
November, 2007Dec 14, 2007
IMG_4886_3_1.JPG
November, 2007Dec 14, 2007
IMG_4884_2_1.JPG
September, 2007Dec 14, 2007
IMG_5045_3_1.JPG
Photo of the north dining patio.Dec 14, 2007
IMG_5044_2_1.JPG
In this view I have constructed new stairs and have intalled the sidewalk curbing. You can also see the new retaining wall and south tree planter.Dec 14, 2007
IMG_5043_1_1.JPG
Here I've used the brick paper cut into strips two bricks wide to outline the checkerboard pattern. The squares will be filled in with grey slate 'stones' in a manner similar to that used on the Tour Guide courtyard project. I used my park photos to replicate as best I could the the location of the bricks. The entryway has also been outlined. Notice the new tree planters (3) that have been made and installed in their new locations.Dec 14, 2007
IMG_4816.JPG
Notice how far back the Plaza Inn sits.Nov 18, 2007
IMG_4842_1_1.JPG
Here's a scene of some trickery going on just outside the Magic Shop. The man has spotted a dollar bill on the sidewalk and thinks it's his lucky day. What he doesn't see is the almost invisible line attached to the bill. Just as he's about to grab it the boy on the stairs pushes the button on his spring-loaded recoil device and yanks it back. The is one of the many gags sold at the Magic Shop. Oh, please don't ask why I was inspired to recreate this scenario.Nov 18, 2007
IMG_4873_5_1.JPG
The north side filled too. Now for some sanding. Things are really shaping up now!Nov 18, 2007
IMG_4872_4_1.JPG
The south dining patio extended with Bondo.Nov 18, 2007
IMG_4871_3_1.JPG
Close-up of the south side dining patio wall. It's now time to bring in the dumptrucks and fill the patios with dirt...okay, more Bondo putty.Nov 18, 2007
IMG_4870_2_1.JPG
Both dining patio walls have been installed and the landscape islands have had their curbing installed. The curbing was created from .030" (height) X .040" (width) styrene strips.Nov 18, 2007
IMG_4869_1_1.JPG
The new retaing wall for the north dining patio extension is installed. Made from .040" X .100" styrene strips, the same will be done on the south side patio. I used a small level to sand the wall, well, level and to the correct height.Nov 18, 2007
IMG_4862_2_1.JPG
Nov 18, 2007
IMG_4861_1_1.JPG
The new terrain has been created with a generous application of Bondo putty. It covers the entire plastic base extension. It has been gently sloped from the main entrance area by the awning to the curbs at Main Street. There is also a gentle slope upwards East Center Street towards the main entance. This photo shows that second application of a bit more putty was necessary to create the proper grading. It hasn't been sanded down yet. The dark red spots are small imperfections that have been filled with auto body "Glazing and Spot Putty." This is also made by Bondo.Nov 18, 2007
IMG_4860_2_1_1.JPG
The terrain (base) of Plaza Inn has been re-graded to a lower level. This was a messy job accomplished with a Dremel tool with a 60 grit sanding drum. Do this stuff outdoors while wearing a dust mask!Nov 18, 2007
IMG_4859_1_1_1.JPG
With our Plaza Inn piece positioned on our platform, a .100" X .100" piece of styrene was glued to the Plaza Inn base while butted up against the Photo Corner side of East Center Street. It was gently tapered down along the same line as the Photo Corner sidewalk towards Main Street. This piece of styrene not only sets the level for the Bondo putty but creates a dam to keep the putty in place.Nov 18, 2007
IMG_4858_11_1.JPG
This shows the original terrain around the dining patio on the East Plaza Street side. This will have to undergo some re-grading in order for the street and sidewalk to be at the same level as the Photo Corner side. This is just fine as there are four steps (stairs) that lead up to the Plaza Inn dining patio from the sidewalk level.Nov 18, 2007
IMG_4855_8_1.JPG
Here is the piece with the newly extended base positioned on our platform. The new landscaped islands and the patio extensions have been drawn to show where they'll go. The line for East Plaza Street has also been drawn. This was accomplished by tracing a stencil created from our scaled plot plans. Note also that the hole from the removal of the intergalactic rocks has been filled with plastic.Nov 18, 2007
IMG_4856_9_1.JPG
This is how the entire Plaza Inn piece now looks with the base fully extended.Nov 18, 2007
IMG_4853_6_1.JPG
Nov 14, 2007
IMG_4852_5_1.JPG
The tops of the brick retainer wall around the dining patios is cut down flush with the patio floors.Nov 14, 2007
IMG_4851_4_1.JPG
Everything is cleared out except the "PLaza Inn" sign over the main entrance and the two tree planters. The sign is removed in the same manner as the birthday banners and the planters are ground away with a Dremel and a ball cutter bit.Nov 14, 2007
IMG_4850_3_1.JPG
It's time to remove the "My Disneyland Birthday" banners. These are held into the base with small diameter steel wire. Careful chiselling at the base shatters the super glue bond and will allow them to be pulled out.Nov 14, 2007
IMG_4848_1_1.JPG
In order to extend the area around the Plaza Inn the intergalactic rocks of the Tomorrowland entrance have to be removed. These will be relocated when we work on installing the Astro Orbitor. I used a cut-off wheel in my Dremel tool along with a hacksaw to cut them away.Nov 14, 2007
IMG_4849_2_1.JPG
Here I'm extending the scenery base using 1/8" thick extruded ABS plastic to fill the gap in our platform created by repositioning this piece farther from the Central Plaza.Nov 14, 2007
IMG_4820_7_1.JPG
Nov 11, 2007
IMG_4819_6_1.JPG
Nov 11, 2007
IMG_4818_5_1.JPG
Nov 11, 2007
IMG_4817_4_1.JPG
The trees and flowers really provide for a park-like atmosphere. If you look closely, the gal on the left is clutching a plush Winnie The Pooh. I love adding these small details.Nov 11, 2007
IMG_4816_3_1.JPG
Nov 11, 2007
IMG_4814_1_1.JPG
I've obviously added the trees. However, these I temporarily "planted" to get the idea of how Town Square will look when completed. The trees shown here are a bit too full in appearance and don't have quite the right look I'm after. I have other trees on order that have a bit less foliage and are closer to the look we want. The trees are about 1.5" tall.Nov 11, 2007
IMG_4815_2_1.JPG
Nov 11, 2007
IMG_4812_1_1.JPG
Nov 09, 2007
IMG_4808_1_1.JPG
Tahnee has chosen the flowers and guests are begining to file in.Nov 09, 2007
IMG_4787_1_1.JPG
Nov 04, 2007
IMG_4792_4_1.JPG
Nov 04, 2007
IMG_4793_5_1.JPG
Okay, looks like we're now ready to plant some flowers in the islands. As soon as Tahnee selects the colors I'll get right on it. :>)Nov 04, 2007
IMG_4791_3_1.JPG
I know you're tempted too, but please don't pick the roses!Nov 04, 2007
IMG_4790_2_1.JPG
This is a good close-up of the flagpole base showing the stepping stones to the Dedication Plaque, the roses, the stantions around the landscaping, and the angled brickwork. Now, I'll try to find some miniature chain to run between the stantions to keep our little guests out of the roses.Nov 04, 2007
IMG_4789_1_1.JPG
In this overhead you can see the finished brickwork. Since no one makes brick sheets in a "Z" pattern for paving purposes, I decided to angle the brick pattern 45 degrees in some areas to represent this -mostly in the circular areas around the flagpole and the coves where the round benches will go.Nov 04, 2007
IMG_4779_6_1.JPG
Oct 30, 2007
IMG_4776_3_1.JPG
Oct 30, 2007
IMG_4775_2_1.JPG
Oct 30, 2007
IMG_4773_5_1.JPG
Oct 29, 2007
IMG_4772_4_1.JPG
Oct 29, 2007
IMG_4771_3_1.JPG
Oct 29, 2007
IMG_4770_2_1.JPG
Oct 29, 2007
IMG_4765_13_1.JPG
With all the curbs, fencing, and contrasting 'stones' in place, all that's left now complete the base is to apply the brick paving paper and form the street curb around the perimeter of the piece.Oct 29, 2007
IMG_4764_12_1.JPG
Oct 29, 2007
IMG_4755_3_1.JPG
To create the decorative contrasting stonework surrounding the artillery pieces and the central flagpole area, I used a compass to draw the circles on a sheet of .010" thick styrene sheet. I then used a protractor to 'divide' the circles every 2 degrees. I then cut the rings from the sheet and then cut the individual 'stones.' Using my penciled outlines as a guide, I applied the 'stones' to the Town Squre base using Testors liquid cement.Oct 29, 2007
IMG_4763_11_1.JPG
The flagpole base was made by stacking 2 octagonal shaped pieces of .040" styrene. The wedge shaped Dedication Plaque base was then notched into the top layer. It was painted using a somewhat thick coat to simulate a concrete texture. The actual Dedication plaque will be made from a photo I took and reduced to the appropriate size.Oct 29, 2007
IMG_4762_10_1.JPG
I installed one of the Olszewski fireplugs in the appropriate location by drilling a 3/16" hole and then 'sinking' the hydrant to ground level. A base layer of finely ground foam 'grass' from Woodland Scenics was applied to the islands. I used finely sifted real dirt and a touch of fine Woodland Scenics "Turf" for the area surrounding the flagpole base. Everything was secured in place using Woodland Scenics Scenic Cement and a pipette (eyedropper). "Flowers" will be added later.Oct 29, 2007
IMG_4759_7_1.JPG
The curbs surrounding the landscape islands have been painted.Oct 29, 2007
IMG_4758_6_1.JPG
Here's an overhead shot showing the layout of Town Square. At this point, just a few more 'stones' outlining the right-hand artillery piece need to be applied.Oct 29, 2007
IMG_4749_2_1.JPG
I mixed Testors brand #1171 Flat Beret Green and # 1124 Gloss Green in a 50/50 ratio to paint the fencing. Mixing glossy and flat paints results in a nice semi-gloss finish. This is the same color I applied to our Preiser N scale benches to be used throughout the Main Street USA realm. The easiest way to paint the fencing was to use an airbrush.Oct 28, 2007
IMG_4747_1_1.JPG
Here all the fencing has been installed and is awaiting paint.Oct 28, 2007
IMG_4746_2_1.JPG
Oct 28, 2007
IMG_4745_1_1.JPG
After the curbing was in place I then applied photo-etched fencing to the inside edges. Oct 28, 2007
IMG_4744_1_1.JPG
After drawing the areas to be landscaped I used .040" X .040" styrene strips to form the curbing around these "islands."Oct 28, 2007
IMG_4743_10_1.JPG
Oct 26, 2007
IMG_4740_7_1.JPG
Oct 26, 2007
IMG_4741_8_1.JPG
Oct 26, 2007
IMG_4739_6_1.JPG
Oct 26, 2007
IMG_4737_4_1.JPG
Oct 26, 2007
IMG_4734_1_1.JPG
Once all the preparation of the sidewalk and patio areas was completed I could then begin to add our brick paper to create the finished surface. It was a bit tedious working the 'bricks' into all the nooks and crannies -and especially around all the poles! - but I took my time and completed it in about three hours. At the stage shown here, I'm getting close to the point of having to join the brick paper together from the patio to the sidewalk. This will require paying attention to the direction of the lines of bricks where they'll meet-up. Note also that in this view the styrene strips necessary to 'square-up' our Carnation piece to Main Street and to close the gap with the New Century Clock piece are clearly visable.Oct 25, 2007
IMG_4732_2_1.JPG
What, no kiosk?! The reception kiosk of our Carnation Cafe' has been removed and will be relocated. The process for removing it is the same I employed with the removal of the piano from the Coke Refreshment Corner project. Our Carnation Cafe' piece required realigning of the sidewalk edge in order for the storefronts to be parallel to Main Street. The edge was corrected by adding strips of styrene and then sanding to the proper angle. Also, the sidewalk needed to be raised towards the Penny Arcade end to keep the curb somewhat even along the entire edge of this piece. Styrene strips were again added and then sanded to the correct contour. Auto body filler was then used to fill and blend the sidewalk level from the storefronts to the new curb edge. Once this was sanded, the sidewalk was now ready for the adding of details like the fireplug, tree gratings, and gas lamp base. The hole shown here is for the gas lamp installation while the X marks the location for a tree to be planted.Oct 25, 2007
IMG_4733_1_1.JPG
The level of the Carnation Cafe's floor (West Center Street) was about .020" lower than the matching level on our New Century Clock piece which forms the other half of West Center Street. I didn't want to raise the entire Carnation piece to mate-up so, I decided to raise the levl of the floor instead. This was accomplished by adding strips of .020" styrene along the edge and also adding pieces in the awkward area around the patio screen shown here. I didn't want to mar the screen by attempting to sand any filler in this location, so, filling this area with styrene was the 'cleanest' way to do this. Auto body filler was again used to fill and blend the patio area to the new level. Note also the sanding of the brick wall which was necessary to close the gap between the New Century and Carnation pieces.Oct 25, 2007
IMG_4479_1_1.JPG
Disneyland's Market House features an authentic pot bellied stove.Oct 16, 2007
IMG_4481_2_1.JPG
Listen in on a party-line on the old fashioned Market House phones.Oct 16, 2007
checkers.jpg
An Early 20th Century General StorePatrons playing checkers near a pot-bellied stove.Oct 15, 2007
IMG025.JPG
September, 2007Oct 05, 2007
IMG024.JPG
September, 2007Oct 05, 2007
IMG017.JPG
September, 2007Oct 05, 2007
IMG002.JPG
September, 2007Oct 05, 2007
0907048-R1-040-18A.jpg
September, 2007Sep 30, 2007
0907044-R1-048-22A.jpg
September, 2007Sep 30, 2007
0907046-R1-048-22A.jpg
September, 2007Sep 30, 2007
0907046-R1-046-21A.jpg
September, 2007Sep 30, 2007
0907046-R1-044-20A.jpg
September, 2007Sep 30, 2007
0907044-R1-020-8A.jpg
September, 2007Sep 30, 2007
0907046-R1-026-11A.jpg
July, 2007Tour Guide Whitney Smith told me another one about the Rainbow Caverns. After getting off the train a small girl whispered to Whitney: "I saw my mommy and daddy kissing in the dark!) (Vacationland, fall 1963)
Sep 30, 2007
IMG_4515_2_1.JPG
This is the altered position of the Plaza Inn as it will sit on our model. The front facade is on a 30 degree angle to Main Street and sits farther back from the Central Plaza. The dining patios and landscaping can now be expanded to accurately replicate the prototype. Notice the Hub has been removed; check the Modified Platform files to see what I've done to it.Sep 30, 2007
IMG_4508_1_1.JPG
This photo shows the standard positioning of the piece on the platform. We will alter this to bring the Plaza Inn into the correct position according to our plot plan of the Park.Sep 30, 2007
IMG_4509_2_1.JPG
Sep 30, 2007
IMG_4562_20_1.JPG
Sep 30, 2007
IMG_4561_19_1.JPG
Sep 30, 2007
IMG_4560_18_1.JPG
Sep 30, 2007
IMG_4559_17_1.JPG
Sep 30, 2007
IMG_4558_16_1.JPG
Sep 30, 2007
IMG_4557_15_1.JPG
Sep 30, 2007
IMG_4556_14_1.JPG
Sep 30, 2007
IMG_4555_13_1.JPG
Sep 30, 2007
IMG_4552_10_1.JPG
Sep 30, 2007
IMG_4550_8_1.JPG
Sep 30, 2007
IMG_4548_6_1.JPG
Sep 30, 2007
IMG_4546_4_1.JPG
Sep 30, 2007
IMG_4545_3_1.JPG
Sep 30, 2007
IMG_4444_1_1.JPG
September, 2007Sep 26, 2007
pano_1_1.jpg
September, 2007Sep 26, 2007
IMG_4359_1_1.JPG
September, 2007Sep 26, 2007
IMG_4412_1_1.JPG
September, 2007Sep 26, 2007
IMG_4411_1_1.JPG
September, 2007Sep 26, 2007
IMG_4401_1_1.JPG
September, 2007Carl Ritter, Disneyland's Peter Pan, watched as a man walked up to the Mad Hatter's Shop with identical twin boys, about eight years old. The man bought two hats and had the boys' names sewn on them. He told the Mad Hatter: "They're my nephews, and I never can remember which is which." As the man walked off, with his back to the twins, they quickly changed hats! (Vacationland, summer 1963)Sep 26, 2007
IMG_4348_1_1.JPG
September, 2007Sep 26, 2007
IMG_4347_2_1.JPG
September, 2007Early morning at Coke Corner -perhaps the best place in the Park to make some new "old" friends.Sep 26, 2007
IMG_4344_1_1.JPG
September, 2007Sep 26, 2007
IMG_4286_1_1.JPG
September, 2007Curiosity finally got the better of Anne Salisbury, who works at the Emporium. On several occasions, she had noticed a little old man, cane in hand, obviously enamored with the horse-drawn vehicles of his boyhood days. Finally, Anne aproached the elderly gentleman and asked if he was having fun. "Sure am," he replied. "What do you like best about Disneyland?," Anne inquired. Said the little old man, "I can jaywalk here!" (Vacationland, Winter 1961-62)Sep 26, 2007
IMG_4291_1_1.JPG
September, 2007Sep 26, 2007
IMG_4290_2_1.JPG
September, 2007Sep 26, 2007
IMG_4289_3_1.JPG
September, 2007Sep 26, 2007
IMG_4285_2_1.JPG
September, 2007Sep 26, 2007
IMG_4284_1_1.JPG
September, 2007Sep 26, 2007
IMG_4270_3_1.JPG
September, 2007Sep 26, 2007
IMG_4273_1_1.JPG
September, 2007Sep 26, 2007
IMG_4267_2_1.JPG
September, 2007Sep 26, 2007
IMG_4262_1_1.JPG
September, 2007Sep 26, 2007
IMG_4452_4_1.JPG
September, 2007Sep 26, 2007
IMG_4448_2_1.JPG
September, 2007Sep 26, 2007
IMG_4449_3_1.JPG
September, 2007Sep 26, 2007
IMG_4446_1_1.JPG
September, 2007Sep 26, 2007
Sprite_8.jpg
Sep 26, 2007
IMG_3297_1_1.JPG
July, 2007Standin' next to two refined women watchin' Disneyland's impressive retreat ceremony at sundown, I saw one turn to the other, and in solemn tones say, "I'm so glad Walt Disney was born." (Vacationland, winter/spring 1964)Sep 20, 2007
IMG_4243_5_1.JPG
Sep 20, 2007
IMG_4242_4_1.JPG
Sep 20, 2007
IMG_4241_3_1.JPG
Sep 20, 2007
IMG_4239_1_1.JPG
Sep 20, 2007
IMG_4240_2_1.JPG
Sep 20, 2007
IMG_4234_19_1.JPG
The tables and chairs were removed by using an X-Acto #5 Heavy Duty knife handle with a 1/4" chisel blade. I am using my pliers to gently tap the knife handle to remove the chairs. I used the same basic technique for the tables, however, the tables have a steel pin to locate them on the piece. Therefore, I used the chisel technique to lift them up a bit and then twisted my knife (like a motorcycle throttle) side to side to lever them out. Sep 18, 2007
IMG_4227_12_1.JPG
Tree, umbrellas, lamps, trash cans and benches cleared out. Next I attack the tables and chairs.Sep 18, 2007
IMG_4226_11_1.JPG
Careful extraction of the trees. The same technique was employed to remove the umbrellas.Sep 18, 2007
IMG_4224_9_1.JPG
We begin to remove the trees. The technique is shown: needle nose pliers grip the trunk and a piece of wood is used as a fulcrum. I push down on the pliers to lever the trees out. Several pieces of wood or plastic were employed to make a fulcrum for some of the harder to reach trees farther in, but the same technique was used for all.Sep 18, 2007
scan0007.jpg
December, 2006Sep 18, 2007
IMG_4215_17_1.JPG
Overhead view shows the layout of the courtyard and relationship to the City Hall piece.Sep 18, 2007
IMG_4212_14_1.JPG
This shot shows the hanging flower baskets installed on the trellis. All that's left to do is trim the wires. I'm now ready to install the fixturing (benches, tables and chairs) and some 'guests' waiting for their tours.Sep 18, 2007
IMG_4208_10_1.JPG
The Tour Guide Kiosk and courtyard are almost done!Sep 18, 2007
IMG_4207_9_1.JPG
The flower boxes have been finished. I used JTT Tree fine foliage to represent the plants.Sep 18, 2007
IMG_4205_7_1.JPG
Here are the trellises. I made these from styrene plastic strips. Also, the plastic tube in the center holds the original light so the kiosk will be illuminated.Sep 18, 2007
IMG_4199_1_1.JPG
This photo shows the flower baskets that will hang from the south trellis. The photo was taken upside-down to show how the baskets will look when installed. I made these from .100" diameter plastic rod cut about 3/32" long. I drilled a .012" hole in the center and glued a short length of .008" diameter brass wire into it. I painted the 'baskets' brown and then glued some light green ground foam from Woodland Scenics onto them. I teased the foam out a bit to replicate the basic shape of the flora as per my pictures. Finally, I glued a few small bits of finely ground white foam on to simulate the blossoms. To install them, I drilled a .012" hole through three of the appropriate beams on the trellis and inserted the wires up and through from the underside. I glued them 'hanging' at the correct length and trimmed off the excess brass wire.Sep 18, 2007
scan0018.jpg
Sep 06, 2007
IMG_4191_3_1.JPG
Here is the completed base ready for the landscaping and details.Sep 06, 2007
IMG_4190_4_1.JPG
This shot shows two details: the proximity of the Trolley to our new Town Square curb, and how I had to sand the Trolley tracks level here because our street casting had to much camber through this stretch. After levelling the tracks, I used a hobby knife and a straight-edge to refine the detail of them so they appear as original.Sep 06, 2007
IMG_4189_2_1.JPG
I used Bondo auto body filler to build up the 'ground' and to create the elevation. I built up a layer that was slightly higher then 3/32" at the center marker and tapered it outwards to the base edge. I then used a Sure-Form tool to remove most of the excess Bondo and to roughly grade the elevation. Finally, I used a 100 grit sanding block to carefully bring the Bondo down, tapering the contour down to the edge of the base until I could just see the top of my plastic marker. I then knew I had the proper elevation for the ground of our Town Square piece.Sep 06, 2007
IMG_4188_1_1.JPG
I drilled a 1/16" hole in the center where the flagpole will be. I then cut a small length of 1/16" plastic rod and glued it in place being sure to leave 3/32" of it from the surface. This will set my elevation for the 'ground' which will taper towards the edges (or curb) of the base.Sep 06, 2007
IMG_4187_4_1.JPG
I have a plot plan of the Park that has been enlarged to the same size as the Olszewski Main Street layout. From this I traced the landscaping layout for Town Square onto a piece of paper. I then cut out the landscaping areas to make a stencil. After centering the stencil I then traced the pattern onto my base. This set my flagpole location which I consider the center of Town Square. Sep 06, 2007
IMG_4186_3_1.JPG
I first made a pattern for the Town Square base by trimming a piece of cardboard to fit. I used this to trace the shape onto a piece of 1/4" extruded ABS plastic known commercially as Celutec and Komatex. A piece of wood would work just as well.Sep 06, 2007
IMG_4185_2_1.JPG
After tracing the cardboard pattern onto the plastic, I carefully sanded the shape so it would fit precisely into the enlarged hole (see the Modified Platform files).Sep 06, 2007
IMG_4070_2_1.JPG
N scale photo-etched railing installed on the west end of the platform. The style of railing on this end is different than that used on the east end. Disneyland engineers and cast members are the only people allowed on the west end while passengers/guests have access to the train cars on the east end. Therefore, a higher fence is used on the east end for added guest security.Sep 03, 2007
IMG_4061_17_1.JPG
Sep 03, 2007
IMG_4060_16_1.JPG
Sep 03, 2007
IMG_4058_5_1.JPG
N scale 6' photo etched fencing replaces the original. No line-jumpers now!Sep 03, 2007
IMG_4051_12_1.JPG
Guests at the east end of the Station platform waiting to board.Sep 03, 2007
IMG_4044_1_1.JPG
I like to model "life" into my layouts. Here a pair of Woodland Scenics N scale engineers have been appropriately painted and posed interacting with a young "guest." They are commenting on the boy's Mickey tee-shirt. "Hey. He's got our boss on." Other figures were used to load the que area. Keen eyes will spot the man reading his 'Your Guide To Disneyland" picked up a few minutes earlier when passing through the turnstile.Sep 03, 2007
IMG_4075_5_1_1.JPG
Sep 03, 2007
IMG_4073_3_1_1.JPG
Sep 03, 2007
IMG_4088_6_1.JPG
The key to installing the brick paper is patience. I'll be showing how I do this in an upcoming file.Sep 03, 2007
IMG_4085_3_1.JPG
The completed piece with the new tree planted. Notice the photo etched grating at the base of the trunk. I'll be showing how I do this in a later file. All we need now is the cigar store Indian in front of the Tabacco...err, Magic Shop.Sep 03, 2007
IMG_4084_2_1.JPG
Here's a good look at the ADA driveway. It was a bit tricky to install the brick paper around the balcony posts! The base for our Marklin gas lamp has also been installed.Sep 03, 2007
IMG_4083_1_1.JPG
Here's the piece with the new brick sidewalk installed.Sep 03, 2007
IMG_4098_4_1.JPG
Sep 03, 2007
IMG_4097_5_1.JPG
Sep 03, 2007
IMG_4095_7_1.JPG
Sep 03, 2007
IMG_4094_8_1.JPG
Sep 03, 2007
IMG_4093_9_1.JPG
Sep 03, 2007
IMG_4092_10_1.JPG
Sep 03, 2007
IMG_4091_3_1.JPG
Sep 03, 2007
IMG_4090_2_1.JPG
Sep 03, 2007
IMG_4089_1_1.JPG
This piece contains shop addresses 201-209 Sep 03, 2007
IMG_4012_1_1.JPG
Another shot of the new columns and marquee. Optical distortion from the camera lens in this extreme close-up makes the columns appear to be leaning. Also, the entire facade has been re-painted to reflect the current scheme.Aug 30, 2007
IMG_4011_10_1.JPG
The new columns with the operating gas lamps have been installed!Aug 30, 2007
IMG_4010_9_1.JPG
Aug 30, 2007
IMG_4009_8_1.JPG
I used my photograph trick again to replace the "Opera House" sign.Aug 30, 2007
IMG_4008_7_1.JPG
This is a shot showing the new marquee sign. The original was too long to allow room for the new lights so I removed it with a Dremel tool and cut-off wheel. I replaced the graphics using my photograph trick described in the City Hall gates project. Our marquee now indicates that the 50th Anniversary show, "Disneyland: The First 50 Magical Years," is showing. Aug 30, 2007
IMG_4007_6_1.JPG
I didn't like the original color of the bricks on our Main Street Bank facade -the tone was too 'peachy' to my eye. I mixed up a shade of brownish-red acryllic hobby paint and re-colored them. I also re-painted the roof trim to an ivory hue.Aug 30, 2007
IMG_4006_5_1.JPG
This shot shows one of the new column bases (to the right) installed. Holes were drilled to accept the new column bases and to allow the wires from the lamps to pass through to the underside of our platform.Aug 30, 2007
IMG_4003_2_1.JPG
This is a photo of one of the new column bases. It is made from 3/32" brass hexogonal tubing with .010" styrene overlays to bring it up to the same size as the originals. Additionally, I used a piece of 1/8" diameter styrene tubing to make the new cap for the support base. After super gluing the tubing to the base, I chucked the brass end into my Dremel. In essence, I had converted my Dremel into a lathe and used a #11 hobby knife to dress (shape) the tubing to form the cap.Aug 30, 2007
IMG_4005_4_1.JPG
This a photo of the new assembled column incorporating the base and Marklin lamp. Notice the very thin wire running through the hexogonal column and extending from the base. Only the column's base will be glued to the sidewalk of the Opera House piece. This way, should the Marklin lamps ever burn out, they can be replaced by simply pulling them up.Aug 30, 2007
IMG_4001_1_1.JPG
Here I'm using a Dremel tool with a cut-off wheel to notch the awning to accept the new gas lamps. The original two 'outside' (left/right) awning support columns have been removed. I will make new ones incorporating the operating Marklin gas lamps. Note too, the original color of the brick work on our Main Street Bank facade (peach color on the right). I'll change this later.Aug 29, 2007
IMG_3986_3_1.JPG
Removing the umbrellas is done by using needle nose pliers to grasp the pole and then leveraging them out. A fulcrum was built up from a couple of scrap pieces of bass wood to provide a good angle of attack and to protect the base area from damage.Aug 29, 2007
IMG_3990_1_1.JPG
"hmmm, which one of these lucky ones will be Rod Miller? Stay tuned..."Aug 29, 2007
IMG_3988_2_1.JPG
"Sorry Rod, but you need a make over, and we need to fill Coca-Cola Corner with guests!"Rod and his piano were delicately removed by the following prcedure: 1) Carefully plot and mark the center of the piano on the underside of the base. Carefully measure and draw the outline of the piano base. 2) Use a 1/4" drill to create a hole under the piano. DO NOT DRILL TOO DEEP OR ALL THE WAY THROUGH! 3) Use a Dremel Tool with a round cutter bit to mine-out the area underneath the piano progressing SLOWLY. Eventually you will remove the material to the point when the piano can be broken free with very little effort. 4) fill the hole with a piece of plastic and fill any imperfections with putty. Aug 29, 2007
IMG_3996_1_1.JPG
Aug 29, 2007
scan0038.jpg
Aug 26, 2007
scan0037.jpg
Aug 26, 2007
scan0033.jpg
Aug 26, 2007
scan0032.jpg
Aug 26, 2007
scan0030.jpg
Aug 25, 2007
scan0028.jpg
Rod Miller in 1976Rod is wearing the first "official" costume Disneyland tailored for him. Surprisingly, Rod was responsible for his own costumes from 1969 until 1976. The pink shirt he is sporting in this shot he still owns!Aug 25, 2007
scan0026.jpg
Rod Miller surrounded by young admirers in 1976. On a family visit in 1971, my dad introduced himself to Rod. Being a piano player too, dad expressed his appreciation for Rod's playing. After a few moments, Rod invited my dad to "sit down and play a little." It may have been one of the fewest times Boogie Woogie style piano was heard at Coke corner! JasonAug 25, 2007
scan0022.jpg
Aug 25, 2007
scan0021.jpg
Aug 25, 2007
scan0006.jpg
Aug 25, 2007
IMG_2523_1_1.JPG
Aug 25, 2007
IMG_2522_2_1.JPG
Aug 25, 2007
scan0020.jpg
Aug 25, 2007
scan0019.jpg
Aug 25, 2007
scan0017.jpg
Aug 25, 2007
IMG_3977_6_1.JPG
This shot shows the north side (or right) gate attached to the Emporium piece. It also shows the modified street and sidewalk.Aug 25, 2007
IMG_3978_7_1.JPG
Because the Disneyland Street Car Gates have beautiful artwork advertising the "Joy Of Motoring," I felt the best way to model them was to incorporate an actual photograph. During a visit to the park I took a photo of the gates as 'squarely' as I could. I also used a 50mm lens to lessen optical distortion as much as possible. I reduced my photograph 47% on a copy machine to 'scale' them to the size necessary. I fabricated the gates from styrene and then carefully trimmed the copy to fit them. This view shows my original photo (with some glare) with the re-sized copy.Aug 25, 2007
IMG_3976_5_1.JPG
Here is the completed south side (or left) gate and cast member door on the Firehouse.Aug 25, 2007
IMG_3974_3_1.JPG
I decided to re-route the Street Car tracks to behind the City Hall structures where they are located at the park. To do this was fairly easy using the Olszewski piece from the platform. This view shows the re-routed tracks with the positioning of the gates. It also shows the notching necessary to integrate the piece with the City Hall base.Aug 25, 2007
IMG_3973_2_1.JPG
This shot shows the section that will bend to the left to lead the tracks behind City Hall. The reddish 'dot' is where I have imbedded a 3/16" diameter neodium magnet which will keep the gates in the proper closed position. Each gate was fitted with a piece of 1/8" long .050" diameter steel piano wire 'plug' inserted into a hole drilled into the bottom at the end. This will provide the necessary 'attraction' for the magnet to hold the gates closed. Some sanding down of the surface was necessary to make this piece the same level as the Main Street piece and also to allow clearance for the gates to swing.Aug 25, 2007
IMG_3972_1_1.JPG
This view shows where I cut the supplied landscaping piece to modify the track route. A portion of the remaining straight section of tracks will be used to extend the tracks behind Citty Hall and into a scratch-built Street Car barn.Aug 25, 2007
IMG_3981_2_1.JPG
The umbrellas, tables, and chairs removed.Aug 25, 2007
IMG_3980_1_1.JPG
Removing the tables and chairs by snapping them off with a needle-nose pliers. Aug 25, 2007
scan0016.jpg
Aug 24, 2007
IMG_3077_2_1_1.JPG
Aug 24, 2007
IMG_2724_16_1.JPG
Aug 24, 2007
IMG_2723_15_1.JPG
Aug 24, 2007
IMG_2722_14_1.JPG
Aug 24, 2007
IMG_2721_13_1.JPG
Aug 24, 2007
IMG_2720_12_1.JPG
Aug 24, 2007
IMG_2719_11_1.JPG
Aug 24, 2007
IMG_2718_10_1.JPG
Aug 24, 2007
IMG_2716_8_1.JPG
Aug 24, 2007
IMG_2714_6_1.JPG
Aug 24, 2007
IMG_2712_4_1.JPG
Aug 24, 2007
IMG_2710_2_1.JPG
Aug 24, 2007
scan0011.jpg
Aug 22, 2007
scan0010.jpg
Aug 22, 2007
scan0009.jpg
July, 2007Aug 22, 2007
scan0008.jpg
Aug 22, 2007
IMG_3951_1_2_1.JPG
I have drawn a line here relocating the curb edge. I then used a Dremel tool to grind away the street to the level necessary to blend it in to the Main Street roadway piece. This created a new curb separating the street from the sidewalk. The photo was taken on a white table so there is almost no visable contrast between the Disney Showcase piece and the work surface!Aug 22, 2007
IMG_3971_1_1.JPG
I decided to make a pair of operating Street Car gates. First step was to fill the door on the side of the Firehouse using the same techniques described in the Tour Guide courtyard project. A new door with a brick support column for the southside gate was fabricated and attached to the side of the Firehouse.Aug 22, 2007
IMG_3899_1_1.JPG
The brickwork has been added to the courtyard. I used Paper Creek N scale brick paper pattern sheets to accomplish this. I used Woodland Scenics "Scenic Accents" glue to adhere the paper to the base. We're going to use the same paper to eventually "pave" the entire Main Street sidewalks!Aug 19, 2007
IMG_3870_1_1_1.JPG
The kiosk has been hollowed out and I've opened three of the facing windows. Also notice the top 1/16" of the roof has been removed for accuracy. We're now open for business. Anyone for a "Walk In Walt's Footsteps" ?Aug 19, 2007
IMG_3915_4_1.JPG
Aug 19, 2007
IMG_3913_2_1.JPG
New hedges and flowers.Aug 19, 2007
IMG_3912_1_1.JPG
The holes from all the removed details (benches, lamps, etc.) are filled with putty and sanded.Aug 19, 2007
IMG_3911_13_1.JPG
Aug 19, 2007
IMG_3910_12_1.JPG
Aug 19, 2007
IMG_3909_11_1.JPG
Aug 19, 2007
IMG_3907_9_1.JPG
Once all the "flowers" have been removed brown earth collored paint is applied. Also, the hedges get a new coat of dark green. I'll add a lighter color of fine ground foam over them to make them come "alive".Aug 19, 2007
IMG_3906_8_1.JPG
I'm using a Dremel tool to carefully grind out the planters. I'm being careful to leave the hedges in place. New landscaping will be "planted" later.Aug 19, 2007
IMG_3905_7_1.JPG
The planters have had all the "flowers" removed.Aug 19, 2007
IMG_3903_5_1.JPG
Aug 19, 2007
IMG_3902_4_1.JPG
Aug 19, 2007
IMG_3901_3_1.JPG
Aug 19, 2007
IMG_3900_2_1.JPG
In this view I have removed all the trees and small details (except the firebox) to clear the way for applying the brick paper.Aug 19, 2007
IMG_3898_17_1.JPG
Aug 19, 2007
IMG_3897_16_1.JPG
Aug 19, 2007
IMG_3896_15_1.JPG
Aug 19, 2007
IMG_3895_14_1.JPG
I've temporarilly attached the new courtyard to the City Hall base. You can really see how it will look when finished.Aug 19, 2007
IMG_3894_13_1.JPG
Aug 19, 2007
IMG_3893_12_1.JPG
Aug 19, 2007
IMG_3892_11_1.JPG
The lattice work has been fabricated on the north walls.Aug 19, 2007
IMG_3891_10_1.JPG
Aug 19, 2007
IMG_3890_9_1.JPG
Detail painting of the City Hall.Aug 19, 2007
IMG_3889_8_1.JPG
Aug 19, 2007
IMG_3887_1_1.JPG
Here is the completed back side of the Tour Guide building showing the relocated rear door and brick wall modifications. All that's left now is to fill the gap in the roof. Aug 15, 2007
IMG_3885_2_1.JPG
This is a new brick overlay with the cast member entrance. This too was made from N scale DPM brick material but its thickness had to be reduced to about .020" as to not noticably extend the rear of the building.Aug 15, 2007
IMG_3886_3_1.JPG
A relief is created to accept the new door and brick wall overlay. The relief only had to be about .015" deep.Aug 15, 2007
12_Bath_Time.mp3
Bath TimeThis tune is played from the 2nd story window at the Hotel Marceline.Aug 12, 2007
0907813-R1-043-20_1_1.jpg
July, 2007The Disney Showcase as it is in 2007. Notice how street lamps and trees have been moved and relocated; something that continues on Main Street as the park evolves but is rarely noticed by most guests. Also notice that ramps for strollers and wheelchairs have been installed on the corners.Aug 12, 2007
IMG_3805_2_1.JPG
Aug 12, 2007
IMG_3804_1_1.JPG
The brick planters, cast member door jam, and south side walls have been installed around the courtyard. The slate paving stones have been individually cut from .010" styrene and glued to the base. This was a tedious task but I had no other good option.Aug 12, 2007
0907813-R1-035-16_1_1.jpg
July, 2007Aug 12, 2007
0907813-R1-029-13_4_1.jpg
July, 2007Tour Guide Marilyn Hughes was watchin' a small boy named Steve, who was on her tour, leanin' over the water near the Mark Twain dock, watchin' the ducks swimmin' in the river. Fearful that he might fall in, she called to him, "Stevie, what are you doing?" A passin' man looked at her in surprise, shook his head and then approached her. "Do you know all the ducks by name?" he said. (Vacationland, winter/spring 1964)Aug 12, 2007
0907813-R1-025-11_6_1.jpg
July, 2007Disneyland's red-clad Tour Guides are evidently making quite a hit with the visitors. The pretty little misses escort guests around the Park, and provide an especially good way for the first-time visitor to see the Magic Kingdom. Seems like one manufacturer was so impressed with his Guide that he sent her a present: one dozen pair of knee-length red woolen stockings, just like the ones all the girls wear! (Vacationland, fall 1963)Aug 12, 2007
IMG_3820_11_1.JPG
Aug 12, 2007
IMG_3777_2_1.JPG
Aug 12, 2007
IMG_3775_4_1.JPG
Aug 12, 2007
IMG_3771_6_1.JPG
Aug 12, 2007
IMG_3768_3_1.JPG
Aug 12, 2007
IMG_3767_10_1.JPG
Aug 12, 2007
IMG_3765_8_1.JPG
Aug 12, 2007
IMG_3764_7_1.JPG
Aug 12, 2007
IMG_3761_2_1.JPG
Aug 12, 2007
IMG_3760_11_1.JPG
Aug 12, 2007
IMG_3759_12_1.JPG
Aug 12, 2007
IMG_3756_18_1.JPG
Aug 12, 2007
IMG_3752_9_1.JPG
The Tour Guide kiosk in original form. We'll modify this piece later.Aug 10, 2007
IMG_3751_8_1.JPG
The City Hall base has been cut away. The original door has been removed and a new cast member swing-door has been fabricated and attached to a brick 'jam.' A Dremel tool with a cutting wheel was used to remove the base material. This is not for the faint of heart!Aug 10, 2007
IMG_3748_5_1.JPG
Aug 10, 2007
IMG_3745_2_1.JPG
The Tour Guide kiosk has been removed from the City Hall piece and the courtyard can be laid-out.Aug 10, 2007
IMG_3741_3_1.JPG
The larger gingerbread pieces have been installed. Aug 10, 2007
IMG_3740_2_1.JPG
These are the dormers. The gingerbread trim has yet to be installed.Aug 10, 2007
IMG_3734_2_1.JPG
The gingerbread Victorian trim was hand carved from an .020" ABS plastic sheet. Styrene is far too fragile to withstand removal of material in such proximity! Once I laid out and cut my originals I used an airbrush to create stencils (visable to the left) to expedite production of subsequent pieces. Two of these patterns were needed for the different sizes used on the structure. This is the larger one. This work takes a delicate touch.Aug 10, 2007
IMG_3732_6_1.JPG
The door and windows on the backstage side were guessed at. Aug 10, 2007
IMG_3728_2_1.JPG
With the sub-roof and tower structure in place the scale shingle roof sheets can now be added. These were robbed from an Atlas N scale station kit and re-sized as necessary. Aug 10, 2007
IMG013.JPG
June, 2007Aug 08, 2007
IMG_3720_3_1.JPG
The newly installed wall overlay for the Hotel Marceline has been painted and the tiny globe lamps installed.Aug 06, 2007
IMG_3719_5_1.JPG
Here you can clearly see the tight confines of this alleyway at the end of east Center Street!Aug 06, 2007
IMG_3726_1_1.JPG
This shot shows the Disney Showcase piece prior to removal of the lightposts and trash cans. These are cleared away so the re-paving of the sidewalks with brick paper can begin.Aug 06, 2007
IMG_2750_11_1.JPG
Aug 06, 2007
IMG_2749_10_1.JPG
Aug 06, 2007
IMG_2746_7_1.JPG
Aug 06, 2007
IMG_2744_5_1.JPG
Aug 06, 2007
IMG_2600_1_1.JPG
Aug 06, 2007
IMG_2527_1_1.JPG
Aug 06, 2007
IMG_2505_6_1.JPG
Aug 06, 2007
IMG_2504_7_1.JPG
Aug 06, 2007
IMG_2503_8_1.JPG
Aug 06, 2007
IMG_2502_3_1.JPG
Aug 06, 2007
IMG_2501_2_1.JPG
Aug 06, 2007
IMG_2500_1_1.JPG
Aug 06, 2007
IMG_2460_3_1.JPG
Aug 06, 2007
IMG_2457_6_1.JPG
Aug 06, 2007
IMG_2454_9_1.JPG
Aug 06, 2007
IMG_2452_11_1.JPG
Aug 06, 2007
IMG_2544_7_1.JPG
Aug 06, 2007
IMG_2542_6_1.JPG
Aug 06, 2007
IMG_2541_5_1.JPG
Aug 06, 2007
IMG_2540_4_1.JPG
Aug 06, 2007
IMG_2539_3_1.JPG
Aug 06, 2007
IMG_2538_2_1.JPG
Aug 06, 2007
IMG_2537_1_1.JPG
Aug 06, 2007
IMG_3295_2_1.JPG
June, 2007Aug 06, 2007
IMG_2920_1_1.JPG
July, 2007Aug 06, 2007
IMG_2599_1_1.JPG
Aug 06, 2007
IMG_2499_1_1.JPG
Aug 06, 2007
IMG_2497_2_1.JPG
Aug 06, 2007
IMG_2496_3_1.JPG
Aug 06, 2007
IMG_2495_4_1.JPG
Aug 06, 2007
IMG_2493_6_1.JPG
Aug 06, 2007
IMG_2492_8_1.JPG
Aug 06, 2007
IMG_2414_5_1.JPG
Aug 06, 2007
IMG_2412_6_1.JPG
Aug 06, 2007
IMG_2406_11_1.JPG
Aug 06, 2007
IMG_2398_16_1.JPG
Aug 06, 2007
IMG_2813_1_1.JPG
June, 2007Aug 06, 2007
IMG_2730_5_1.JPG
Aug 06, 2007
IMG_2727_2_1.JPG
Aug 06, 2007
IMG_2729_4_1.JPG
Aug 06, 2007
IMG_2603_1_1.JPG
Aug 06, 2007
IMG_3112_1_1.JPG
July, 2007There's just something about hangin' out here that's very pleasing. From here, it's just a short walk over to my favorite realm; Adventureland. The atmosphere is always enjoyable with smells wafting out from the Candy Palace, the putt-putt and playful horns from the passing Horseless Carriages, the clip-clop and clanging bells from the Horse-drawn Street Cars, guests relaxing and planning their day, and, of course, the pleasing sound of the corner's pianist. It's a great spot to enjoy a snack and it seems to always have its share of Disney-philes who've also discovered the alure of "the corner." So, next time you're at the Park, drop on over and introduce yourself.Aug 06, 2007
IMG_3683_7_1.JPG
Aerial view showing the curious profile of the Tour Guide structure. The angled wall is necessary to allow clearance for the maintenance road which crosses underneath the railroad tracks to the backstage area behind the west side of Main Street. Also note corner pieces that keep the walls squared-up and adds strength. Aug 06, 2007
IMG_3678_2_1.JPG
We give the Tour Guide Kiosk a proper home.The walls facing the courtyard have been cut from Evergreen Scale Models #4542 Board and Batten sheet styrene. The lower brick base walls have been cut from Design Preservation Models (DPM) N scale Modular Wall System pieces. Here a square is used to align the walls while the glue dries.Aug 06, 2007
IMG_3681_5_1.JPG
The sub-roofing is cut from .020" sheet styrene. It is important that this is kept flush with the walls because later a scale shingle roof will be added on top.Aug 06, 2007
IMG_3712_3_1.JPG
Aug 06, 2007
IMG_3709_1_1.JPG
Aug 06, 2007
IMG_2811_1_1.JPG
June, 2007Aug 06, 2007
IMG_2803_1_1.JPG
September, 2007Aug 06, 2007
IMG_3722_8_1.JPG
This view shows the replacement of the original trees. Note the grating installed at the base.Aug 06, 2007
IMG_3386_1_1.JPG
The park's old gum trees were photographed and modeled. Here is a completed tree. Also, the original cast-in landscaping was ground out and replaced with Woodland Scenics ground foam.Aug 04, 2007
IMG_3073_6_1.JPG
New trees were fabricated from JTT Trees and plastic tubing. The plastic tubes were notched to allow the wiring for the LEDs. Once the tree armature assembly was complete I used model putty to sculpt the final trunk's shape and texture.Aug 04, 2007
IMG_3070_3_1.JPG
We decided to replace the original LEDs in the trees with new "warm white" ones from Radio Shack. Here they have been positioned and soldered together to simplify installation and wiring.Aug 04, 2007
IMG_3063_1_1.JPG
After removing the original tree a new hole was drilled to relocate the new one. This was done on both sides.Aug 04, 2007
IMG_2393_1_1.JPG
The track has been installed through our prepared right of way.Aug 04, 2007
IMG_2391_2_1.JPG
There were some uneven spots in the face of our loading platform. Plastic styrene strips and putty took care of them.Aug 04, 2007
IMG_2390_3_1.JPG
When the sanding was complete all the wood left was in the low areas. The train right of way has now been leveled and is ready for the track.Aug 04, 2007
IMG_2389_4_1.JPG
Sanding the Balsa has begun.Aug 04, 2007
IMG_2387_4_1.JPG
Aug 04, 2007
IMG_2385_3_1.JPG
I decided to glue 1/16" Balsa wood strips using CA (cyanoacrylate) to the railroad's right of way to fill the low spots. This will be sanded down to level the entire area.Aug 04, 2007
IMG_2356_1_1.JPG
We decided that the correct height for the station piece (and thus all Main Street pieces) is determined by the Olszewski platform's leading base piece that the turnstiles are mounted to. Since we couldn't alter the height of this piece it set this dimension for the entire layout.Aug 04, 2007
IMG_2354_2_1.JPG
Aug 04, 2007
IMG_2353_3_1.JPG
Basswood strips and ABS plastic has been used to shim the station piece to the proper height necessary to meet our track roadbed.Aug 04, 2007
IMG_2318_2_1.JPG
After sanding the right of way there were still several low spots that needed to be filled. Hmmm.Aug 04, 2007
IMG_2320_3_1.JPG
Here we've used palstic strips and putty to straighten out the curved ends of the loading platform. Since we've elected to use Z gauge track we won't need to retain these curves as we'll have ample room for the smaller track pieces.Aug 04, 2007
IMG_2317_1_1.JPG
Sanding to level the right of way. Notice at this point that the ends of the loading platform are still curved. We will straighten these out later.Aug 04, 2007
IMG_2224_3_1.JPG
Using a Dremel to further remove material. Always use eye protection. Also, a good dust mask is mandatory when using this tool on the cast resin Olszewski pieces.Aug 04, 2007
IMG_2221_1_1.JPG
Carefully clearing the RR right of way.Aug 04, 2007
IMG_2228_5_1.JPG
The original trees to either side of the Mickey planter were removed. New replacemants will be made.Aug 04, 2007
IMG_3540_3_1.JPG
Aug 03, 2007
IMG_3529_1_1.JPG
The new Main Street Locker and Storage facility is in place at the end of east Center Street. There is a large tree located just over the drinking faucet wall and I'm testing the look and placement of it here.Aug 03, 2007
IMG_3525_2_1.JPG
Here is the nearly complete Main Street Lockers and Storage facility with the new cast member gate and modified drinking faucet wall. A new upper latice was made too. The globe lamps are visible to either side of the entance. Aug 03, 2007
IMG_3519_1_1.JPG
These are the globe light fixtures that will go on the new wall of the Hotel Marceline. A slightly larger pair were made for either side of the entrance to the locker facility.Aug 03, 2007
IMG_3493_1_1.JPG
Here I've made the new wall overlay from .020" sheet styrene and have fabricated the window. This is the wall oposite the entrance of the Locker and Storage facility and will be glued to the side of the Hotel Marceline.Aug 03, 2007
IMG_3442_1_1.JPG
In this view the new locker building (walls) has been assembled and placed to check position and clearance.Aug 03, 2007
IMG_3440_2_1.JPG
Main Street Lockers and Storage is usually the first "attraction" I experience at the park. There's not much room but we'll squeeze it in.The first step was to remove the drinking faucet and cast member gate. This was done with a Xacto knife handle with a fine saw blade. The marring of the wall is okay as this will be covered with a new overlay containing the new window. Once the original wall and gate were removed I proceded to remove the landscaping and level the base. This was achieved with careful use of a Dremel tool.Aug 03, 2007
IMG_3075_2_1.JPG
Aug 03, 2007
IMG_2739_4_1.JPG
Aug 03, 2007
IMG_2738_3_1.JPG
Aug 03, 2007
IMG_2737_2_1.JPG
Aug 03, 2007
IMG_2437_1_1.JPG
Aug 03, 2007
IMG_2434_4_1.JPG
Aug 03, 2007
IMG_2436_3_1.JPG
Aug 03, 2007
IMG_2429_6_1.JPG
Aug 03, 2007
IMG_2431_5_1.JPG
Aug 03, 2007
IMG_2732_2_1.JPG
Jul 30, 2007
IMG_2731_1_1.JPG
Jul 30, 2007
IMG_2536_9_1.JPG
Jul 30, 2007
IMG_2535_8_1.JPG
Jul 30, 2007
IMG_2534_7_1.JPG
Jul 30, 2007
IMG_2533_6_1.JPG
Jul 30, 2007
IMG_2531_4_1.JPG
Jul 30, 2007
IMG_2528_1_1.JPG
Jul 30, 2007
IMG_2686_3_1.JPG
Jul 29, 2007
IMG_2609_1_1.JPG
Jul 29, 2007
IMG_2571_18_1.JPG
Jul 29, 2007
IMG_2570_17_1.JPG
Jul 29, 2007
IMG_2569_16_1.JPG
Jul 29, 2007
IMG_2568_15_1.JPG
Jul 29, 2007
IMG_2562_10_1.JPG
Jul 29, 2007
IMG_2560_8_1.JPG
Jul 29, 2007
IMG_2559_7_1.JPG
Jul 29, 2007
IMG_2558_6_1.JPG
Jul 29, 2007
IMG_2557_5_1.JPG
Jul 29, 2007
IMG_2555_3_1.JPG
Jul 29, 2007
IMG_2553_1_1.JPG
Jul 29, 2007
04_Alexander_s_Ragtime_Band.mp3
Alexander's Ragtime Band by Rod MillerJul 29, 2007
01_Walt_Disney_s_Dedication_of_Dis_1.mp3
Walt Disney's Dedication of Disneyland on July 17th, 1955Jul 29, 2007
03_Meet_Me_Down_on_Main_Street.mp3
Meet Me Down on Main Street by the MellowmenThis song originated in "Crazy Over Daisy", a 1950 Donald Duck cartoon and has been Main Street USA's unofficial theme song since the mid-1950's.Jul 29, 2007
IMG_2607_1_1.JPG
Jul 29, 2007
IMG_2552_8_1.JPG
Jul 29, 2007
IMG_2551_7_1.JPG
Jul 29, 2007
IMG_2550_6_1.JPG
Jul 29, 2007
IMG_2548_4_1.JPG
Jul 29, 2007
IMG_2549_5_1.JPG
Jul 29, 2007
IMG_2547_3_1.JPG
Jul 29, 2007
IMG_2546_2_1.JPG
Jul 29, 2007
IMG_2545_1_1.JPG
Jul 29, 2007
IMG_2682_4_1.JPG
Jul 29, 2007
IMG_2679_1_1.JPG
Jul 29, 2007
IMG_2606_1_1.JPG
Jul 29, 2007
IMG_2576_4_1.JPG
Jul 29, 2007
IMG_2574_2_1.JPG
Jul 29, 2007
IMG_2575_3_1.JPG
Jul 29, 2007
IMG_2780_3_1.JPG
June, 2007Jul 29, 2007
IMG_2760_2_1.JPG
June, 2007Jul 29, 2007
IMG_2755_1_1.JPG
June, 2007Jul 29, 2007
IMG_2678_3_1.JPG
Jul 29, 2007
IMG_2677_2_1.JPG
Jul 29, 2007
IMG_2605_1_1.JPG
Jul 29, 2007
IMG_2491_1_1.JPG
Jul 29, 2007
IMG_2490_2_1.JPG
Jul 29, 2007
IMG_2489_3_1.JPG
Jul 29, 2007
IMG_2488_4_1.JPG
Jul 29, 2007
IMG_2486_6_1.JPG
Jul 29, 2007
IMG_2485_7_1.JPG
Jul 29, 2007
IMG_2483_9_1.JPG
Jul 29, 2007
IMG_2482_10_1.JPG
Jul 29, 2007
IMG_2479_12_1.JPG
Jul 29, 2007
IMG_2478_13_1.JPG
Jul 29, 2007
1050 files on 1 page(s)