Anaheim Groves Improvement District- About Us
Logo-Home   Home   FAQs   Blog   Forum   About_Us   Contact_Us   


   

Main Street Stage

 
 


219 files in 4 albums with 1 comments viewed 28410 times
Modeled Main Street Stage


stage_1138.JPG

The modified platform has outlived its useful purpose for us. The modeled platform will allow us to put all of our Main Street U.S.A. pieces in their correct locations and properly connect the other realms of the Park.

155 files, last one added on Jan 19, 2010

Modified Platform


IMG_2628_9_1.JPG

"...if the individual wants a larger experience, then the transformation from collector to hobbyist needs to occur. This transformation will begin as soon as you start to remove the buildings from their bases and place them into the platform unit. By the time the track is in place and the train is operational you will have developed a high comfort level in working with the platform and most importantly, grasping a sense of ownership...My final thought is this. As you gain more confidence when working with the base you should feel free to alter it in anyway and in any direction your imaginations can take you. The model train industry is overflowing with great accents for you to add to your base. We have given you the start, where you take it from here will be up to you. This is where the real fun will begin".
Robert Olszewski (Olszewski Studios Website)

62 files, last one added on Mar 23, 2008

Olszewski Platform


IMG_2971_1_1.JPG

1 files, last one added on Jul 28, 2007

Side by Side- Modeled Main Street Stage


br_1000.jpg

Identical bridges? Here is my modeled bridge compared with Disneyland's. There's just one little difference: the bridge I made is for the main access to Carnation Gardens directly from the Central Plaza while the bridge shown in the old postcard was replaced sometime in the 1990s. The design of the two is remarkably similar, wouldn't you agree? While the design is the same the Carnation Gardens bridge is actually much wider. Model photos of the current bridge by the castle can be found in the "agidistrict Platform" album.

1 files, last one added on Oct 29, 2008

4 albums on 1 page(s)

Random files
IMG_3921_4_1.JPG
I found our street piece was a bit low in front of City Hall which had the effect of creating a very tall curb there. To remedy this I used some .100" styrene strip and glued it to the street edge following the curb. I was careful not to glue it to the City Hall base. The styrene set the new street level so the next step was to sand the ends gently to blend them out to the "good" street level on either side. Then, after masking off the trolly tracks, I used plastic auto body filler (Bondo) to fill in the new street. In this view the tracks have been masked and I'm ready to add the filler.
IMG_4514_5_1.JPG
Here is the separated and re-spaced Hub.
IMG_3923_5_1.JPG
Close up of street work.
mp_9073.JPG
A close-up of the tracing method with the push-pin. I will draw over these with Sharpie pens to make them stand-out better.
mp_9025.JPG
The first step in painting the roadway was to mask the Street Car tracks. I air-brushed them With Floquil brand "roof Brown" laquer-based model railroad paint. Here are the painted tracks.
IMG_3083_5_1.JPG
Cutting a piece of Town Square support.

Last additions
stage_1138.JPG
Jan 19, 2010
stage_1137.JPG
1 commentsJan 19, 2010
stage_1139.JPG
Jan 19, 2010
stage_1136.JPG
Jan 19, 2010
stage_1135.JPG
Jan 19, 2010
stage_1134.JPG
Jan 19, 2010

 
   
   

Choose your language: